Healthrider H50 Crosswalk Sl Treadmill User Manual page 21

English manual
Table of Contents
THE INFORMATION MODE
The console features an information mode that keeps
track of the total distance that the walking belt has
moved and the total number of hours that the treadmill
has been used. The information mode also allows you
to select a measurement system of miles or kilometers,
and to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The upper display will show
the total number of hours
the treadmill has been used.
The lower left display will
show the total number of
miles (or kilometers) that the
walking belt has moved.
An "E" for English miles or
an "M" for metric kilometers
will appear in the lower right
display. Press the Speed
increase button to change
the unit of measurement if
desired.
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on, the console will function
normally when you plug in the power cord, press the
power switch into the reset
position, and insert the key
into the console. However,
when you remove the key,
the displays will remain lit,
although the buttons will not
function. If the demo mode
is turned on, a "d" will appear in the lower right display
while the information mode is selected. To turn on or
turn off the demo mode, press the Speed decrease
button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console's
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole through the MP3 jack.
To use the MP3 jack, plug your audio cable into the
MP3 jack. Then, plug your audio cable into a jack on
your MP3 player, CD player, or other personal audio
player. Make sure that your audio cable is fully
inserted.
Next, press the play button on your MP3 player, CD
player, or other personal audio player. Adjust the vol-
ume on your personal audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
21
Table of Contents
loading

This manual is also suitable for:

Hrtl24912.0

Table of Contents