When To Use The Embedded System Diagnostics; Running The Embedded System Diagnostics - Dell POWERVAULT NX200 Hardware Owner's Manual
Dell personal computer user manual
Hide thumbs
Also See for POWERVAULT NX200:
- Getting started with (111 pages) ,
- Getting started manual (47 pages) ,
- Troubleshooting manual (17 pages)
Table of Contents
•
Display, print, or save test results
•
Temporarily suspend testing if an error is detected or terminate testing
when a user-defined error limit is reached
•
View help messages that briefly describe each test and its parameters
•
View status messages that inform you if tests are completed successfully
•
View error messages that inform you of problems encountered
during testing
When to Use the Embedded System Diagnostics
If a major component or device in the system does not operate properly,
component failure may be indicated. As long as the microprocessor and the
system's input/output devices are functioning, you can use the embedded
system diagnostics to help identify the problem.
Running the Embedded System Diagnostics
The embedded system diagnostics program is run from the Unified Server
Configurator (USC) screen.
CAUTION:
this program with other systems may cause invalid results or error messages.
1 As the system boots, press .
2 Click Diagnostics in the left pane and click Launch Diagnostics in the
right pane.
The Diagnostics menu allows you to run all or specific diagnostics tests
or to exit.
148
Running the System Diagnostics
Use the embedded system diagnostics to test only your system. Using
- Quick Links:
- Sata Backplane Board Connectors
- Getting Help
Hide quick links:
Table of Contents
Troubleshooting
