Page 1
® Dolphin 7600II Mobile Computer ® with Windows Mobile User’s Guide–Preliminary...
Page 2
Honeywell. Honeywell shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material.
Table of Contents Chapter 1 - Agency Approvals Label Locations ........................1-1 LED Safety Statement....................1-1 FCC RF Radiation Exposure Statement ................1-1 Approvals by Country......................1-2 R&TTE Compliance Statement—802.11b/g, Bluetooth, and/or GSM........1-2 Dolphin RF Terminal—802.11b/g, Bluetooth, and/or GSM ..........1-3 For European Community Users ..................1-3 Waste Electrical and Electronic Equipment Information ............1-3 Chapter 2 - Getting Started Out of the Box ........................2-1...
Page 5
Chapter 7 - Connecting the Terminal Connections Tab ......................... 7-1 Infrared Communication ...................... 7-2 IrDA Port Location ......................7-2 Sending Data ......................... 7-2 Receiving Data ......................7-3 Connections Manager ......................7-4 Task Tab........................7-4 Advanced Tab........................ 7-5 Dolphin Wireless Manager ....................7-6 Dolphin Wireless Manager Window................
Page 6
Back Panel ........................10-3 Powering the HomeBase Device..................10-3 Charging the Main Battery....................10-4 Mounting the Dolphin HomeBase Device................10-5 Bottom Panel Dimensions ....................10-6 Chapter 11 - Dolphin QuadCharger Device Overview..........................11-1 Front Panel ........................11-1 Back Panel ........................11-2 Supplying Power to the QuadCharger Device..............
Agency Approvals Label Locations Dolphin 7600II terminals meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Please read these guidelines carefully before using your Dolphin terminal.
R&TTE Directive. In addition, this product complies to 2006/95/EC Low Voltage Directive when supplied with the recommended power supply. Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive.
For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with the Honeywell Dolphin accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Page 10
In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a sound way.
Dolphin HomeBase Device (see page 10-1). Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may cause damage not covered by the warranty. Dolphin® 7600II Mobile Computer User’s...
Step 3. Boot the Terminal The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process. Only tap the screen when prompted. When the boot process is complete, the Today Screen (see page 2-2) appears and the terminal is ready for use.
Icons in the Navigation Bar Indicator Meaning The terminal could not synchronize data with the workstation via ActiveSync New e-mail or text message (SMS) New voicemail New instant message Ringer off Voice call Voice call in progress Calls are forwarded Call on hold Missed call Data call in progress...
Icons in the Navigation Bar Indicator Meaning EDGE connected Roaming Radio is disabled The radio is not connected to a network Radio connected No radio signal The terminal is searching for a signal Radio signal strength Wi-Fi on Wi-Fi data call Pending alarm Bluetooth Selecting Programs...
Using the Stylus The terminal comes with a stylus inserted into the Stylus Slot (see page 3-10), Use this stylus (or your finger) to select or enter information on the touch screen. The stylus functions as a mouse; generally, a tap is the same as a click.
Peripherals The following items are sold separately and enhance your terminal’s capabilities. For information about how to purchase these items, contact a Honeywell sales representative. Dolphin HomeBase Device ™ The Dolphin HomeBase device is a charging and communication cradle supports USB communication, enabling your terminal to interface with the majority of PC-based enterprise systems.
Front Panel Features Decode LED Scan LED 1/4 VGA Touch Screen Display (screen protector installed at the factory) Microphone Hardware Application Buttons Keyboard (29-key numeric) Decode and Scan LEDs The Scan LED lights red when you press the Scan trigger in scanning applications. The Decode LED lights green when a scanned bar code is successfully decoded.
Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than 0.8mm. Use of the Honeywell stylus included with the terminal is recommended at all times.
Page 21
1. You will need a strong, flat, plastic card (a credit card, for example) to wedge under the existing screen protector. Note: If you have one, you can also use the small plastic squeegees designed for touch panels. 2. Press the Blue + Backlight keys to put the terminal in Suspend Mode...
Page 22
4. Wipe the screen with a clean, non-abrasive, lint-free cloth. Note: Use ionized air, if available, to blow additional dirt or particles off the touch panel. Installing Your Screen Protector When installing a new screen protector, use a flat plastic card (such as a credit card) to apply the screen protector smoothly and remove any air bubbles.
Page 23
2. Clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure nothing is attached to the top of the touch panel. 3. Release the left edge of the releasing paper on the screen protector. 4. Align the exposed edge of the screen protector along the left edge of the touch panel. Make sure that it lies flush with edges of the touch panel.
Page 24
6. Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Touch Panel 7. Use the card as necessary to smooth out any air pockets or bumps after application. Press gently but firmly. 8.
Page 25
11. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth. 12. Press the Backlight key to wake the terminal. 13. For maximum performance, recalibrate the screen. Tap Start > Settings > System tab > Screen > Align Screen. 14.
Back Panel Features Image Engine Window Accessory Attachment Stylus Slot Rear Speaker Finger Saddle SIM Card Door I/O Connector Accessory Attachment This button can be used with various accessories; see Using the Accessory Attachment page 3-11. Finger Saddle This is a slightly depressed and angled area of the back panel that is designed to cradle or “saddle”...
Make sure that the accessories do not contain any metal and are manufacturer-recommended. Attaching the Hand Strap The accessory attachment is also how you attach the hand strap available from Honeywell. 1. Remove the accessory attachment with a Phillips head screwdriver.
Side Panel Features DC Power Headset IrDA Port Jack Jack Side Button Access Door Side Door Note: This graphic shows the left side of the terminal. Access Door This door covers the memory card slot. To increase memory, install a memory card in this slot. ™...
Page 29
Side Door The rubber door on the left side panel provides access to the Headset and DC power jacks. When closed, the side door seals the terminal from moisture and particle intrusion thus preserving the terminal’s environmental rating. Dolphin® 7600II Mobile Computer User’s Rev (a) 01 3 - 13 5/29/08...
Installing Memory Cards This terminal supports microSD and microSDHC memory cards up to 4GB. To install an SD card, you must open the access door on the side panel (Side Panel Features, page 12). Access door removal requires a Torx 5 (T5). 1.
Page 31
Do NOT resume terminal operation while the access door is open! Operating the terminal while the access door is open may cause damage not covered by the warranty. The access door must be properly sealed before resuming terminal operation. Failure to seal the access door may cause damage not covered by the warranty.
I/O Connector The I/O mechanical connector is designed to work exclusively with peripherals and cables designed for the Dolphin 7600II terminal. This connector powers the terminal, charges the main battery, and facilitates communication. This connector supports full speed USB 1.1 communication (up to 12 Mbps) and RS-232 communications with a maximum speed of 115Kbps and seven baud rate settings.
Connecting the USB Cable Connect the USB cable to the I/O connector to facilitate USB communication between the terminal and host workstation. Connector Host Workstation Cable *Power Connector Port *This is a communication-only cable until you plug the power cable into the power port. Connecting the Power Cable The power port on the back end of the USB connector fits the power cable that comes with each terminal.
When communicating via ActiveSync, your terminal is designed to be connected to the host workstation with a communication peripheral sold/manufactured by Honeywell, such as the charge/communication cable. Use of any peripheral not sold/manufactured by Honeywell may cause damage not covered by the warranty. Communication Types...
Page 35
Setting Up the Host Workstation Verify that ActiveSync is configured to use the appropriate communication type by clicking File > Connection Settings. For USB communication, For RS-232 Note: You can have both USB and RS-232 selected in the software without affecting processing. However, your hardware setup should use only RS-232 or USB, not both.
Page 36
The Mobile Device folder opens in Windows Explorer. The terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting as you would for moving files between folders on your hard drive. 3 - 20 Rev (a) 01 Dolphin®...
Guidelines for Battery Pack Use and Disposal The following are general guidelines for the safe use and disposal of batteries: • Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured by Honeywell may pose a personal hazard to the user.
Page 38
• Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power. • If you observe that the battery is physically damaged in some way, please send it to Honeywell or an authorized Honeywell service center for inspection.
Page 39
RegBackup Power Tool. For more information about Registry Power Tools, refer to the Dolphin Power Tools User’s Guide available for download at www.honeywell.com/aidc. Dolphin® 7600II Mobile Computer User’s Rev (a) 01...
Internal Backup Battery Located inside the terminal, the backup battery is a 2.4V nickel metal hydride (NiMH) battery. The internal backup battery prevents the terminal from being reset when you remove the main battery pack. This battery retains RAM data and allows the real-time clock to remain operational for up to 30 minutes.
Resetting the Terminal There are two ways to reset the Dolphin terminal: a soft reset and a hard reset. Soft Reset (Warm Boot) A soft reset re-boots the terminal without losing RAM data. You would perform a soft reset 1) when the terminal fails to respond, 2) after installing software applications that require a reboot, or 3) after making changes to certain system settings.
Suspend Mode Suspend mode suspends terminal operation. The terminal appears to be “off” when in suspend mode. The terminal is programmed to go into suspend mode automatically when inactive for a specified period of time. You can set this time period in the Power setting. To Put the Terminal in Suspend Mode Press the Blue + Backlight...
Using the Keyboards Overview There are two keyboard options: a 29-key keyboard and the 38-key keyboard. 29-Key Numeric Keyboard 38-Key Alpha Keyboard SCAN S E N D E N D PQRS WXYZ BKSP START The buttons are recessed under the overlay for maximum durability and the panel is backlit for maximum viewability in various lighting conditions.
Function Keys Function keys appear on both keyboards and perform specific functions. Name Function Toggles the keyboard backlight on and off. Backlight Backspace Backspace moves the cursor back one space. If you are typing text, a character is deleted each time you press the backspace key. Escape Cancels an action.
Alpha/Numeric Indicator The Navigation bar features an icon that indicates the alpha/numeric status of the keyboard. This icon changes when the keyboard status changes. Icon Keyboard Status The keyboard is in lowercase alpha mode. The keyboard is in shifted (uppercase) alpha mode. The keyboard is in numeric mode.
29-Key Numeric Keyboard Hardware Application Buttons SCAN Scan E N D S E N D Escape Navigation Keys Enter Shift Alpha Indicators PQRS WXYZ Backspace Space BKSP START Backlight Modifier Keys Navigation Keys Located in the center of each keyboard for easy access with either hand, the navigation keys enable you to move the cursor through application screens.
Hardware Application Buttons These four buttons are programmed to launch software applications when the Today Screen (see page 2-2) is on the screen. Hardware Application Buttons SCAN E N D S E N D To customize these settings, tap Start > Settings > Personal tab > Buttons Buttons Column Matching Hardware Button Buttons 1–4...
Toggling Between Alpha and Numeric Modes The 29-key keyboard defaults to numeric mode, which means that the keyboard boots up to numeric mode after each hard reset. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys.
29-Key Blue Key Combinations (Alpha Mode) Tap the Blue modifier key to switch to alpha mode for the next key pressed. Double-tap the Blue modifier key to switch to alpha mode permanently. Character Uppercase: Double-tap SFT @ ? ! : @ ? ! : pqrs PQRS...
Character 29-Key Red Key Combinations Special Characters Key Combination Character Red + Left Arrow Red + Right Arrow Red + BKSP Red + SP Red + . Red + P1 Red + P2 Red + P3 Red + P4 Functions Key Combination Function Red + ESC (hold)
Page 51
Key Combination Function Red + 9 Red + 0 Dolphin® 7600II Mobile Computer User’s Rev (a) 01 4 - 9 5/29/08 Guide–Preliminary...
38-Key Alpha Keyboard Scan Navigation Keys Backspace Enter Escape Space Shift Backlight NUM Lock Key Modifier Keys Toggling Between Alpha and Numeric Modes The 38-key keyboard defaults to lowercase alpha mode, which means that the keyboard boots up to lowercase alpha mode after each hard reset. Numeric mode is when you type numbers with the number keys.
38-Key Red Key Combinations Key Combination Function Red + ESC (hold) Soft reset (warm boot) Red + TAB (hold) Hard reset (cold boot) Red + Down Arrow Red + Up Arrow Red + Left Arrow Red + Right Arrow Red + Left Side Button Red + Right Side Button Red + A Red + F...
Page 54
Numbers Character Special Characters Character Special Functions Character Volume up Volume down 4 - 12 Rev (a) 01 Dolphin® 7600II Mobile Computer User’s 5/29/08 Guide–Preliminary...
Using the Image Engine Overview ™ The Dolphin terminal houses a compact image engine using Adaptus Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding. The image engine can also capture digital images. *Pull the plastic tab to remove the plastic film cover over the image engine window before activating the image engine.
• Select Scan Demo to verify decoding, or • Select Image Demo to verify imaging. For more information about Demos, refer to the Dolphin Demos User’s Guide, which is available for download from www.honeywell.com/aidc. LEDs The LEDs in the center of both keyboards (for location, see...
Page 58
Sample Bar Codes You can use the following bar codes to verify decoding: Sample 128 Sample PDF417 Code 128 PDF417 Test Message Omni-Directional Scanning Positions The high-vis aiming pattern frames the bar code to provide you with the best scanning performance. Note: To achieve the best read, the aiming beam should be centered horizontally across the bar code.
Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following basic guidelines, however, new users can easily develop their own technique and, with practice, quickly learn to adapt to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing and has a slightly degraded appearance compared to the captured image.
System Settings Overview Customized settings are available on the Start menu. Tap Start > Settings and settings screen opens displaying the Personal tab. Settings consists of three tabs: Personal, System, and Connections. Personal Tab System Tab Connections Tab Description See Page Personal Customizes buttons, set SIP options, and adjust headset settings.
Personal Tab To access the Personal tab, go to Start > Settings. The screen opens displaying the Personal tab. Icon Description For more information… Buttons Program the side buttons to perform specific Buttons on page 6-3. tasks. Input Customizes the SIP. Input on page 6-4.
2. Verify the assignment by tapping the button on the keyboard. For more information about the HotKeys Power Tool, refer to the Dolphin Power Tools User’s Guide, which is available for download from the web at www.honeywell.com/aidc. Button Assignments By default, the side buttons (for locations, see page 3-6) activate the image engine but can be programmed to launch applications or execute commands in the Buttons setting.
Additional Functions The Assign a program list also contains the following commands: Command Description Opens the soft input panel. Nothing happens when the button is pressed. This is the default setting for the LSide and RSide buttons and means that pressing either button activates the image engine. ...
Menus You can add existing programs you use often, such as File Explorer, to the Start menu for faster access. You are not installing the program, just allowing access to it from the Start menu. To add programs to the Start menu, you can use •...
Page 66
2. Tap and hold on the program, then tap Copy on the pop-up menu. 3. Navigate to the Windows folder and open the Start Menu (My Device > Windows > Start Menu), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. 4.
System Tab The System tab enables you to verify and sometimes alter system parameters. To access the System tab, go to Start > Settings > System tab. Tap the appropriate icon to open that system setting. For details, • See About on page 6-7.
Backlight The Backlight system setting enables you to customize backlight functionality for the display. The backlight for the color display is user-defined. Tap Start > Settings > System tab > Backlight. There are two tabs: The Battery tab determines display backlight settings when the terminal is running on battery power. The External tab determines display backlight settings when the terminal is running on external power.
ClearType Tuner This system setting enables you to adjust the level ClearType font rendering by moving a slider. The sample text displays the setting results immediately. Of course, you must first enable ClearType font rendering to change the appearance of fonts on the screen; see ClearType Tab on page 6-14.
You cannot change the terminal’s memory allocation in the Memory system setting. To change the memory allocation, you need to use the SetRAM Power Tool (Start > Power Tools > SetRAM). For more details, please refer to the Honeywell Power Tools User’s Guide, which is available for download from www.honeywell.com/aidc.
Page 71
This tab displays the current capacity and usage statistics Storage Card Tab of the selected memory type; IPSM or Storage Card. Select the memory type from the drop-down list. IPSM is selected by default. Total storage card memory=The total MB of memory capacity of IPSM or Storage Card.
Power Power system settings contains three tabs: Battery and Advanced. Battery Tab Displays the remaining charge of batteries. For more information about the terminal’s batteries, see Battery Power on page 3-10. Advanced Tab Determines power time-outs. For On battery power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on battery power.
Remove Programs Remove Programs enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messages that the terminal is out of memory. The programs removed are removed from RAM memory. Any program (usually CAB or DLL files) stored in the Autoinstall folder (My Device >...
Page 74
Screen The Screen system setting contains three tabs: Alignment, Clear Type, and Text Size. Alignment Tab Orientation–The default orientation for the screen is Portrait. Select one of the Landscape options to change the screen orientation. Align Screen–You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately.
WAN Info When the GSM radio is active, WAN Info displays useful statistics for the radio. To verify whether or not the GSM radio is enabled, check the Dolphin Wireless Manager (see page 7-6). Dolphin® 7600II Mobile Computer User’s Rev (a) 01 6 - 15 5/29/08 Guide–Preliminary...
Connecting the Terminal Connections Tab The Connections system setting provides access to the terminal’s various communication options. Icon Description See Page Beam Enables and disables infrared receiving. Configures the Bluetooth connection. only Bluetooth This icon appears if a Bluetooth radio and driver is installed on the terminal.
Infrared Communication Using the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Mobile information such as Contacts and Tasks, as well as software upgrades. The maximum data transfer speed is 115 Kbps.
5. When the IrDA port finds the IrDA port of the other device, it immediately starts sending the selected file. The selected device reads “Sending.” 6. When the file transfer is complete, the selected device reads “Done.” Receiving Data The Beam Setting must be set to receive for the terminal to receive data from other infrared devices. 1.
All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP). Zero-Config Wi-Fi The zero-config Wi-Fi feature of Windows Mobile is disabled on Dolphin 7600II terminals. If you are using one of the on-board wireless radios to connect to a network, do not enter network parameters in the connections manager.
Proxy Server Connections If you are connected to your ISP or private network during synchronization, the terminal should download the proper proxy settings during synchronization with the PC. If these settings are not on your PC or need to be changed, ask your ISP or network administrator for the proxy sever name, server type, port, type of Socks protocol used, and your user name and password.
802.11b/g radio is enabled after each hard reset by default. The WLAN radio is configured in the Honeywell WLAN Security Supplicant. The Honeywell WLAN Security Supplicant User’s Guide is available for download from the Dolphin 7600II terminal’s product page at www.honeywell.com/aidc.
Each of the three radios have their own configuration utilities that you can access through the Menu. For 802.11b/g Tap WLAN Settings and the Honeywell WLAN Security Supplicant opens. The Honeywell WLAN Security Supplicant User’s Guide is available for download from the Dolphin 7600II terminal’s product page at www.honeywell.com/aidc. For GSM Tap Phone Settings and the Phone opens (see page 8-1).
Installing Additional Software Dolphin terminals ship with the operating system, radio drivers, and custom Honeywell software already installed. These default programs install when your terminal first boots up. You can install additional software programs to the terminal provided that the following parameters are met: •...
If the File is Not an Installer Some programs cannot be installed on workstations because they are designed exclusively for Windows Mobile-based devices. In these cases, the appropriate files must be stored on the host workstation and transferred to the terminal via ActiveSync Explore. Note: You know that the program is not an installer because an error message stating that the program is valid but designed for a different type of computer appears when you try to install the program on the workstation .
COM Port Assignment Table The terminal ships with the com ports assigned as follows: COM Port Assignment Description COM1 Siemens GSM radio (not accessible) COM2 Serial port RS-232 Connector on the bottom panel COM3 Raw IR Raw Infrared (not accessible) COM4 IrDA Serial Infrared (SIR) up to 115 Kbps...
Network Cards The Network Cards setting displays the network cards installed in the terminal. 1. Tap Start > Settings > Connections > Network Cards. 2. Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.) 3.
The USB to PC applet enables you to switch between RNDIS (Remote Network Driver Interface Specification) USB and Serial USB communication. Dolphin 7600II terminals default to Serial USB. Honeywell recommends using Serial USB. To change this setting, tap Start > Settings > Connections tab > USB to PC .
Working with GSM Overview ® The Dolphin 7600II can be configured with an integrated Siemens GSM/GPRS EDGE quad-band radio module for WWAN communications. Short for Global System for Mobile communications, GSM is an open, non-proprietary wireless WAN system that is constantly evolving and growing.
SIM Card Installation Short for Subscriber Information Module, a SIM card stores the subscriber's personal information, GSM/ GPRS radio settings, security keys, contacts, etc. SIM cards can be installed in multiple devices, which enables you to switch devices without losing personal and setup information. SIM Card Requirements Before installing the SIM card: •...
8. Fasten the SIM card door. 9. Insert the battery pack and tap the SCAN key to wake the terminal from Suspend mode. 10. When the operating system recognizes the new SIM card, a notification message pops up. Enabling the GSM Radio Be default, the GSM radio should be enabled after each hard reset.
Data Communication You set up data communication via the connections manager. The carrier on the SIM card is the ISP. System Requirements • The GSM radio must be enabled; see Enabling the GSM Radio on page 8-3. • You must have an active SIM card installed; see SIM Card Installation on page 8-2.
Page 93
4. Enter the APN and tap Next. 5. Enter the username and password from the account and tap Finish. 6. On the Connections window, tap Manage existing connections. The connection you just created should appear in the list on the modem tab. Dolphin®...
7. Tap and hold on the connection and select Connect on the popup menu. 8. The network icon in the Navigation bar indicates the GSM radio is attempting to connect 9. When the connection is complete, the network icon changes to: 10.
Voice Communication You can use the Dolphin terminal as a phone via the GSM radio. Audio Modes There are two audio modes: Speakerphone and Headset. Speakerphone Use the microphone on the front panel and the speaker on the back panel to operate the GSM phone in Speakerphone mode.
Accessing the Dialer Window When the GSM radio is active, tap Start > Settings > Connections tab > Dolphin Wireless Manager, then tap Menu > Phone Settings. The Phone dialer opens. Displays the network carrier from the SIM card. Displays the most recent calls.
Setup Options Tap Menu > Options. You can also tap Start > Settings > Personal tab > Phone when the GSM radio is enabled. The Phone Settings tab windows appear. Phone Tab Services Tab Network Tab Establish or change the terminal’s For each service, the phone will read You can set networks on the Network PIN on the Phone tab.
Working with the Bluetooth Radio Enabling the Bluetooth Radio You enable the Bluetooth radio in the Dolphin Wireless Manager (see page 7-6). 1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager 2. Tap anywhere inside the Bluetooth rectangle and Bluetooth begins activating. 3.
Connecting to Other Devices Bluetooth You need to perform a device discovery and then select a discovered device and connect to it. Pairing happens as part of the connection process. 1. In the Dolphin Wireless Manager, tap Menu > Bluetooth Settings. Tap Start >...
Page 101
4. You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and tap Next. If the device does not have a specific passcode, enter one in the Passcode field and tap Next. The Bluetooth radio tries to connect with the device.
8. The device appears in the list on the main window. 9. After the passcodes have been accepted on both sides, you have a trusted (“paired”) connection. Pairing and Trusted Devices The terminal does support pairing. Pairing happens during general connection setup. Paired devices are "trusted"...
Types of Devices and Services When you tap Add new device on the Devices tab, the Bluetooth radio scans for discoverable Bluetooth devices in range, which are Bluetooth devices that have been made discoverable. Device Types The types of devices in the vicinity of the radio appear in the list of discovered devices.
Connecting to Bluetooth Printers 1. Make sure the Bluetooth printer is in range and set to be discoverable by other Bluetooth devices. 2. Look up the Bluetooth printer’s broadcasted ID. 3. Perform a device discovery (Tap Settings > Connections > Bluetooth > Add new device.) 4.
Transferring Files 1. Tap Start > Programs > File Explorer. 2. Navigate to the file you want to transfer. 3. Tap and hold on the file and select Beam File on the popup menu. 4. The Bluetooth radio begins searching for devices. When a Bluetooth device is first found, it appears as an Unknown device;...
Making the Terminal Discoverable By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bluetooth devices. To make the terminal discoverable, tap the Mode tab. Select Make this device visible to other devices and tap OK. Dolphin®...
The power cable that ships with each unit also powers the HomeBase device. Use only the peripherals, power cables, and power adapters from Honeywell. Use of peripherals, cables, or power adapters not sold/manufactured by Honeywell may cause damage not covered by the warranty.
Front Panel Terminal Well Dock LED Terminal Well Place the terminal in this well to communicate with a host device, power the terminal, and charge its battery. Dock LED Turns solid green when the terminal is properly seated in a powered HomeBase device. When this light is on, the terminal is connected to the HomeBase device.
The terminal requires 5 volts DC input for communication and battery charging; the power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from Honeywell convert the voltage appropriately. The same power cable that ships with each terminal Plug Adapter can be used to power the HomeBase.
ActiveSync (see ActiveSync Communication on page 3-18). Honeywell recommends that you leave the HomeBase connected to its power source at all times, so that it is always ready to use. Charging the Main Battery The HomeBase powers the terminal and fully charges its main battery pack in less than four hours.
Mounting the Dolphin HomeBase Device If you want to mount the HomeBase to a vertical surface, be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is seated in the HomeBase. Back Panel Dimensions .15 in.
Bottom Panel Dimensions .55 in. .67 in. (14.07 mm.) (16.97 mm.) 3.73 in. (94.88 mm.) Note: The pivot connector should be facing straight out the bottom panel (as shown) when mounting the HomeBase to a vertical surface. 10 - 6 Rev (a) 01 Dolphin®...
Honeywell may result in damage not covered by the warranty. Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured by Honeywell may result in damage not covered by the warranty.
Back Panel Power Switch Power Supply Connector Power Supply Connector Use this connector to attach the power supply to the QuadCharger device. The universal power supply accepts input voltages between 90-265 volts. Power Switch Toggle the power switch to turn the QuadCharger device on and off. Supplying Power to the QuadCharger Device Use the power adapter cable that comes with the QuadCharger device so that the input voltage is adjusted appropriately.
Battery Charging Inserting and Removing Battery Packs To insert a battery pack, place the end of the battery without the locking tab into the bottom of the charging pocket and snap the battery into place with a hinging motion. To remove a battery pack, push the locking tab down and pull the battery away from the charging slot with a hinging motion.
Mounting the QuadCharger Device The QuadCharger device should be mounted on a dry, stable surface such as a desktop or workbench, or a flat, vertical surface such as a wall. Mounting Location When choosing a location for the QuadCharger device: •...
Page 119
2. Drill two holes into the wall, using the slots of the DIN Rail to locate. To ensure stability, holes should be located at least 4 inches (101.6mm) apart. 3. Insert a screw into each hole. The screw heads should be flush with the surface of the DIN rail, Dolphin®...
The Status LED lights red and stays An error occurred during the self-diagnostic test for that particular on without a battery in the charging charging pocket. Call Honeywell Product Service and Repair (see slot.
Mounting on page 12-3. 1. Insert the back panel of a Dolphin 7600II terminal and gently place the lip of the top of the latch in place at the bottom of the image engine window. Latch Do NOT pull back on the latch and snap in place! Make sure that the Dolphin terminal is securely fastened inside the mount but do not use excessive force.
Page 122
2. The latch at the top should grip the back of the image engine window slot. Image Engine Latch Window 12 - 2 Rev (a) 01 Dolphin® 7600II Mobile Computer User’s 5/29/08 Guide–Preliminary...
Mounting The Dolphin Mobile Mount ships with a standard RAM mount (101B). You attach one ball joint that you attach to the back panel of the mount (with the fasteners provided). Dolphin® 7600II Mobile Computer User’s Rev (a) 01 12 - 3 5/29/08 Guide–Preliminary...
Page 124
Then, you attach the rest of the RAM mount. Then, fasten the RAM mount to a stable surface. 12 - 4 Rev (a) 01 Dolphin® 7600II Mobile Computer User’s 5/29/08 Guide–Preliminary...
™ SOTI MobiControl (remote device management), PowerNet Terminal Emulation (TNVT, Software: ™ 3270, 5250), and ITScriptNet Installed Honeywell Power Tools and Demos and ITScriptNet Ready-To-Go applications Applications: CPU: Samsung 2440 400 MHz Memory: 128MB RAM X 128MB Flash Mass Storage: BT &...
Page 126
1D Symbologies: Codabar, Code 3 of 9, Code 11, Code 32, Pharmaceutical (PARAF), Code 93, Code 128, EAN with Add-On, EAN with Extended Coupon Code, EAN-8, EAN-13, GS1-128, GS1 Databar, Interleaved 2 or 5, ISBT 128, Matrix 2 of 5, MSI, Plessey, PosiCode, Straight 2 of 5 IATA, Straight 2 of 5 Industrial, Telepen, Trioptic Code, UPC, UPC-A, and UPC-E 2D Symbologies: Aztec, Codablock, Code 16K, Code 49, Composite, Data Matrix, GS1 Databar,...
Page 127
Dimensions: BT & BT/WLAN Configurations: 7.0 in. long X 2.7 in. wide X 1.7 in. deep (17.8 cm. long X 6.9 cm. wide X 4.2 cm. deep) GSM Configurations: 7.1 in. long X 2.7 in. wide X 1.9 in. deep (18 cm. long X 6.9 cm. wide X 4.7 cm.
Dolphin HomeBase Device Structural Dimensions 4 in. high X 4.4 in. wide X 3.7 in. deep (10.2 cm. X 11.2 cm. X 9.4 cm.) Weight 11.2 oz. (318g) Material Polycarbonate ABS blend Color Gray Mounting Two keyholes on the back panel for wall-mounting Capacity One Dolphin terminal Environmental...
Page 129
Dolphin HomeBase Device Fire Retardant: UL 94-VO Dolphin® 7600II Mobile Computer User’s Rev (a) 01 13 - 5 5/29/08 Guide–Preliminary...
Dolphin QuadCharger Device Structural Dimensions 11 in. long X 4.8 in. wide X 1.5 in. high (27.9 cm. long X 12.2 cm. wide X 3.8 cm. high) Weight 15.1 oz. (428g) Material Case: Polycarbonate ABS blend Color: Gray Mounting Use DIN rail slide to mount to a desktop or wall; see DIN Rail Dimensions page 11-4.
Customer Support Product Service and Repair Honeywell provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty service, contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product.
No product will be accepted by Honeywell without a Return Materials Authorization, which may be obtained by contacting Honeywell. In the event that the product is returned to Honeywell or its authorized service center within the Warranty Period and Honeywell determines to its satisfaction that the product is defective due to defects in materials or workmanship, Honeywell, at its sole option, will either repair or replace the product without charge, except for return shipping to Honeywell.
Page 134
How to Extend Your Warranty Honeywell offers a variety of service plans on our hardware products. These agreements offer continued coverage for your equipment after the initial warranty expires. For more information, contact your Sales Representative, Customer Account Representative, or Product Service Marketing Manager from Honeywell, or your Authorized Reseller.
Page 136
Honeywell 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 ™ 76-WM-UG Rev (a) 01 5/29/08...