Table of Contents
Table 6-13 Inactive/Cold Removal Procedure of a PCIe Card (continued)
Work
Order
9
10
11
12
13
14
15
16
*1 Reconfigure logical domains as required. For details, see "Chapter 3 Operations for Domain Configuration" in
the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide. If you have reconfigured a
logical domain, save the logical domain configuration information.
6.4.2
Inactive/Cold Removal Workflow of the HDD/SSD
You can perform inactive/cold removal of the HDD/SSD in the following configuration:
Configuration connecting two or more SPARC M12-2S units to a physical partition
■
Before removing the HDD/SSD, see
Precautions for FRU
Table 6-14
Table 6-14 Inactive/Cold Removal Procedure of the HDD/SSD
Work
Order
1
2
208
Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
Task
Removing the PCIe card from the PCICS
Installing a PCIe card filler in the PCICS,
and installing the PCICS in the SPARC
M12-2S
Incorporating the SPARC M12-2S from
which the PCIe card was removed into
the building block configuration
Powering on the physical partition
containing the SPARC M12-2S that
underwent maintenance
Confirming that there is no problem with
the system from which the PCIe card was
removed
Switching the mode switch on the OPNL
to Locked
Checking the operating condition of the
physical partition and logical domains (*1)
Saving logical domain configuration
information
Reduction."
shows the workflow for inactive/cold removal of the HDD/SSD.
Task
Checking the operating condition of the
system
Releasing the assignment of the I/O
resources of the HDD/SSD to be removed
Reference
"12.3.2 Removing a PCIe Card or PCIe
Card
Filler"
"12.4.1 Installing a PCIe Card or PCIe
Card
Filler"
"10.4.1 Incorporating the SPARC
M12-2S Into a Building Block
Configuration"
"10.9.1 Starting the System With an
XSCF
Command"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.1.1 Saving Logical Domain
Configuration
"Precautions for HDD/SSD
Reference
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
"9.3 Releasing I/O Resources From a
Logical
Domain"
Function"
Domains"
Information"
removal" in
"7.3
Domains"
Table of Contents
