Table of Contents
Table 4-68 System-Stopped/Cold Replacement Procedure of a PCI Expansion Unit
(continued)
Work
Task
Order
5
Switching the mode switch on the OPNL
to Service
6
Removing the power cords of all the
SPARC M12-2/M12-2S units
7
Removing the FRUs in the faulty PCI
expansion unit
8
Installing a FRU in the PCI expansion unit
9
Installing the power cords on all the
SPARC M12-2/M12-2S units
10
Diagnosing all the SPARC M12-2/M12-2S
units
11
Confirming that there is no problem with
the replacement PCI expansion unit
12
Switching the mode switch on the OPNL
to Locked
13
Powering on the physical partitions
14
Checking the operating condition of the
system
Reference
"2.3.2 OPNL Control
Function"
"9.8.2 Removing the Power
PCI Expansion Unit for Fujitsu SPARC
M12 and Fujitsu M10/SPARC M10 Service
Manual
PCI Expansion Unit for Fujitsu SPARC
M12 and Fujitsu M10/SPARC M10 Service
Manual
"10.1.1 Installing a Power
"10.5.1 Diagnosing the SPARC M12
Hardware"
"10.5.3 Checking the FRU Status After
Maintenance"
"2.3.2 OPNL Control
Function"
"10.9.1 Starting the System With an
XSCF
Command"
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical
Chapter 4 FRU Replacement Workflows
Cords"
Cord"
Domains"
149
Table of Contents
