Table of Contents
Safety instructions | BODAS controller RC/3x and RC/4x
2 Safety instructions
2.1 About this chapter
The product has been manufactured in accordance with generally accepted
engineering standards. There is still, however, a danger of personal injury or
property damage if this chapter and the safety instructions in this documentation are
not observed.
▶ Read this documentation completely and thoroughly before working with the
product.
▶ Keep this documentation in a location where it is accessible to all users at all
times.
▶ Always include the required documentation when passing the product on to third
parties.
2.2 Intended use
The control unit is designed for use in mobile working machines provided
no limitations / restrictions are made to certain application areas in data
sheets 95204, 95205, 95206, 95207 and 95208.
▶ Operation of the control unit must generally occur within the operating ranges
specified and released in data sheets 95204, 95205, 95206, 95207 and 95208.
This applies in particular to voltage, current, temperature, vibration, shock and
other described environmental influences.
▶ Its use outside of these specified and approved boundary conditions may result
in danger to life and/or cause damage to components which could result in
sequential damage to the mobile working machine.
2.3 Improper use
Any use other than that described as intended use is considered improper.
Bosch Rexroth AG is not liable for damages resulting from improper use. The user is
solely responsible for any risks arising from improper use.
2.4 Personnel qualifications
The activities described in this documentation require basic mechanical,
electronical/electrical and hydraulic knowledge, as well as knowledge of the
associated technical terms. In order to ensure safe use, these activities should only
be performed by skilled personnel or an instructed person under the direction and
supervision of skilled personnel.
Skilled personnel refers to persons who possess the professional training,
knowledge and experience, as well as the understanding of the regulations relevant
to the work to be done that are necessary to recognize possible dangers and take
the appropriate safety measures. Skilled personnel must follow the rules relevant
to their field and have the necessary expert knowledge of mechatronics, electronics
and hydraulics, if applicable.
Expert knowledge means, for instance:
• Being able to read and fully understand electrical circuit diagrams and hydraulic
diagrams, if applicable,
RE 95240-01-B/2021-01-12, Bosch Rexroth AG
7/24
- Quick Links:
- Operation
- Troubleshooting
- Technical Data
Hide quick links:
Table of Contents
