Table of Contents
Appendix C. Programming the XGS868i Using PanaView™
C.6.1a Volumetric Units
1. Double-click on the desired Volumetric Units for the flow rate display. Table 21 lists the available units.
2. Double-click on the desired Time units for the flow rate display.
3. Double-click on the desired number of Vol Decimal Digits (digits to the right of the decimal point in the volumetric
flow rate display).
C.6.1b Selecting Totalizer Units
1. Double-click on the desired Totalizer Units for the totalized flow rate display. Available units are listed in Table
C-5 above.
2. Double-click on the desired number of Tot Decimal Digits (digits to the right of the decimal point in the totalized
flow rate display).
3. Do one of the following:
•
Mass Flow
ON
If
is
•
Mass Flow
OFF
If
is
Menu.
Note: To activate mass flow, refer to page 110. The following prompts will only appear if mass flow is activated for
both channels.
112
Table 21: Available Volumetric/Totalizer Units
English
Actual Cubic Feet
Thousands of ACF
Millions of ACF
Standard Cubic Feet
Thousands of SCF
Millions of SCF
, proceed to Selecting the Mass Flow Units below.
, the meter returns to the Global PROGRAM window. Click [Exit Page] to return to the Site Edit
Metric
Actual Cubic Meters
Thousands of ACM
Millions of ACM
Standard Cubic Meters
Thousands of SCM
Millions of SCM
DigitalFlow™ XGS868i Programming Manual
Table of Contents
