Table of Contents
Chapter 1. Programming Site Data
1.2 Programming Methods
You can program the XGS868i via either the keypad on the lower part of the glass enclosure, or PanaView™, a
PC-based, non-resident software program that communicates with the XGS868i via its RS232 serial port. PanaView
supplements basic XGS868i functions with several additional capabilities. With PanaView, you can:
•
load and save site file data
•
create and save graph and log files
•
display text output and graphs of live measurement data
•
create custom templates for displaying text, graph and log data
•
interface with multiple GE Measurement & Control instruments.
Although the actual displays differ somewhat, the general procedures are the same for all three programming methods.
This chapter provides detailed programming instructions for use with the keypad. If you are using PanaView™, see
Appendix C, Programming the XGS868i via PanaView™, and/or the PanaView™ User's Manual (910-211) for
detailed instructions.
IMPORTANT:
This manual is for instruments using software version Y4AS or later.
2
DigitalFlow™ XGS868i Programming Manual
Table of Contents
