Table of Contents
Appendix C. Programming the XGS868i Using PanaView™
C.5.2 Entering Data in the Channel System Option
1. From the Channel PROGRAM menu, highlight and double-click on the
2. The first prompt asks for the Channel (Site) Label. Enter the desired label (in any numeric or text combination up
to five characters) in the right pane, and click [Next Item].
3. Enter the desired Channel Message, and click [Next Item].
4. Double-click on the desired Volumetric Units (from the list shown in Table 17).
Note: Refer to the System option of the
5. Double-click on the desired unit of Volumetric Time (from seconds to days) in the volumetric flow display.
6. Double-click on the desired number of Decimal Digits (digits to the right of the decimal point) in the volumetric
flow display.
7. Double-click on the desired Totalizer Units for the totalized flow rate display (listed in Table 17).
8. Double-click on the desired number of Decimal Digits (digits to the right of the decimal point) in the totalized flow
rate display.
The program now varies, depending on whether you have activated
•
If you have activated
•
If you are not using
page 95. Proceed to the Pipe option.
98
Global
menu to choose between English or metric measurements.
Table 17: Available Volumetric/Totalizer Units
English
Actual Cubic Feet
Thousands of ACF
Millions of ACF
Standard Cubic Feet
Thousands of SCF
Millions of SCF
Mass Flow
, continue to step 1 on the next page.
, PanaView returns to the Channel PROGRAM window shown in Figure 41 on
Mass Flow
System
option in the center pane.
Metric
Actual Cubic Meters
Thousands of ACM
Millions of ACM
Standard Cubic Meters
Thousands of SCM
Millions of SCM
Mass Flow
(see Chapter 1 for details).
DigitalFlow™ XGS868i Programming Manual
Table of Contents
