Table of Contents
Available languages
Available languages
Drilling in metal:
♦
Use a metal drill bit (HSS) . For optimum results,
cool the drill bit with cutting oil . Metal drill bits
can also be used to drill into plastics . Start with
a 3 mm diameter drill bit and then increase the
size until the desired hole diameter is achieved .
Drilling in wood:
♦
Use a wood drill with a centre point; for deep
holes, use an auger bit; for large-diameter
holes, use a Forstner bit . Small screws can
be screwed directly into soft wood without
predrilling .
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch off the appliance and remove
the battery before carrying out any
work on the appliance.
The cordless screwdriver is maintenance-free .
■
The appliance must always be kept clean, dry
and free from oil or grease .
■
Never allow liquids to get into the appliance .
■
Use a dry cloth to clean the housing . Never use
petrol, solvents or cleansers which can damage
plastic .
■
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The optimum storage
environment is cool and dry .
NOTE
►
Replacement parts not listed (such as batter-
ies, switches) can be ordered via our Service
hotline .
■
10
│
GB
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase . If this product has any faults,
you, the buyer, have certain statutory rights . Your
statutory rights are not restricted in any way by the
warranty described below .
Warranty conditions
The warranty period starts on the date of purchase .
Please keep your receipt in a safe place . This will
be required as proof of purchase .
If any material or manufacturing fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
or refund the purchase price (at our discretion) .
This warranty service requires that you present the
defective appliance and the proof of purchase (re-
ceipt) within the three-year warranty period, along
with a brief written description of the fault and of
when it occurred .
If the defect is covered by the warranty, your prod-
uct will either be repaired or replaced by us . The
repair or replacement of a product does not signify
the beginning of a new warranty period .
Warranty period and statutory claims for
defects
The warranty period is not prolonged by repairs
effected under the warranty . This also applies to
replaced and repaired components . Any damage
and defects present at the time of purchase must
be reported immediately after unpacking . Repairs
carried out after expiry of the warranty period shall
be subject to a fee .
Scope of the warranty
This appliance has been manufactured in accord-
ance with strict quality guidelines and inspected
meticulously prior to delivery .
The warranty covers material faults or production
faults . The warranty does not extend to product parts
subject to normal wear and tear or to fragile parts
which could be considered as consumable parts
such as switches, batteries or parts made of glass .
PBSA 12 D3
Hide quick links:
Chapters
Table of Contents
