Table of Contents
3.Setting the IP Fax Function
Gateway Setting
Set the necessary settings when a T.38 supporting gateway is used.
Up to 50 units of T.38 supporting gateway can be registered.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Item name
1
Enable VoIP Gateway
When [Enable] is selected for [Enable SIP Server], set [Disable] in [Enable VoIP Gateway] in Gateway Setting.
When [Enable] is selected for [Enable VoIP Gateway], transmission not using a SIP server is also accepted.
2
SIP Transport
3
SIP Reception Port Number
4
Add
5
Delete
6
Check box
7
No.
8
Transmission Condition
9
IP Address
10 Port Number
26 Setting the IP Fax Function from TopAccess
Selects whether enable or disable a T.38 supporting gateway. [Disable] is set
as the default.
Selects the transport protocol for sending a request from SIP to a T.38
supporting gateway.
UDP — Select this to use UDP.
TCP — Select this to use TCP.
Enters the port number which receives SIP packets for a T.38 supporting
gateway. You can enter a value in the range from 1 to 65535. Generally the
default value "5060" is used.
Select this to add a new T.38 supporting gateway.
P.27 "[Add Gateway] screen"
Select this to delete the T.38 supporting gateway from the list.
Selects the check box for the T.38 supporting gateways to be deleted.
The registration number of the T.38 supporting gateway is displayed.
The number registered in [Transmission Condition] in the [Add Gateway]
screen is displayed.
P.27 "[Add Gateway] screen"
The host name or the IP address of the T.38 supporting gateway registered
in [IP Address] in the [Add Gateway] screen is displayed.
P.27 "[Add Gateway] screen"
The number registered in [Port Number] in the [Add Gateway] screen is
displayed. You can enter the port number in the range from 1 to 65535 for
sending packets to the T.38 supporting gateway. Generally the default value
"5060" is used.
Description
Hide quick links:
Table of Contents
