Siemens SIMATIC HMI Series Operating Instructions Manual page 33
Mobile panels 2nd generation
Hide thumbs
Also See for SIMATIC HMI Series:
- System manual (226 pages) ,
- Operating instructions manual (130 pages) ,
- Getting started (52 pages)
Table of Contents
Operational safety in the plant
Short-term PROFINET IO interruptions possible when using protocols with alternative
communication paths
The following applies when you use a protocol with alternative communication paths, for
example, MRP, STP or RSTP, for PROFINET communication: When an interruption in the
network occurs, for example, due to a cable break, PROFINET IO interruptions can occur
during the switching time to the alternative communication path. This can result in personal
injury or property damage.
Take appropriate protection measures to prevent physical injury or material damage.
You can find additional information in the following document:Configuration manual
"SCALANCE X-200" (https://support.industry.siemens.com/cs/ww/de/view/109476763)
Note
Observe the Operational Safety and Product Monitoring newsletter.
Plants with safety-related characteristics are subject to special requirements for operational
safety on the part of the operator. Vendors are also required to comply with certain
measures for monitoring the product. We therefore provide a special newsletter about
product development and properties to inform you about important safety aspects for the
operation of plants. To ensure that you are always kept up-to-date in this regard and can
make changes to your plant, you should subscribe to the appropriate newsletter.
Subscribe to the newsletter for fail-safe system components and the SIMATIC industrial
software at the following link: Newsletter
(https://www.industry.siemens.com/newsletter/public/AllNewsletters.aspx)
To receive these newsletters, select the "News" check box.
Safety during commissioning
The device may only be used in machines which comply with the Machinery Directive
The "Machinery Directive" governs, among other things, the precautions to be taken when
commissioning and operating machines within the European Economic Area.
Failure to follow these precautions is a breach of the Machinery Directive. Such failure may
also cause personal injury and damage depending on the machine operated.
The machine in which the HMI device is to be operated must conform to Directive
2006/42/EC.
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
WARNING
WARNING
Safety instructions
2.1 General safety instructions
33
- Quick Links:
- Product Overview
Hide quick links:
Table of Contents
