Assigning Ip Address And Device Name - Siemens SIMATIC HMI Series Operating Instructions Manual
Mobile panels 2nd generation
Hide thumbs
Also See for SIMATIC HMI Series:
- System manual (226 pages) ,
- Operating instructions manual (130 pages) ,
- Getting started (52 pages)
Table of Contents
Parameterizing the Mobile Panel
5.15 Functions for service and commissioning
5.15.6.2
Assigning IP address and device name
You can use the "Assign IP" function to edit the IP address and device name of target
devices in the subnet of your HMI device. The target device can be a controller or another
HMI device.
Requirement
● The Control Panel is open.
● For HMI devices, the following applies: The project that runs on the target device is
closed.
● For controllers, the following applies:
– The controller is of type S7-300, S7-400, S7-1200 or S7-1500.
– HMI access is allowed in the settings.
– The controller is in "STOP" state.
● Your system administrator has provided you with the necessary information.
Procedure
1. Open the "Service & Commissioning" dialog using the "Service & Commissioning" icon.
2. Change to the "IP Config" tab.
①
②
160
Button for changing IP address and device name
Button for changing the configured communication connections
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
- Quick Links:
- Product Overview
Hide quick links:
Table of Contents
