Configuring A Fail-Safe Mobile Panel - Siemens SIMATIC HMI Series Operating Instructions Manual
Mobile panels 2nd generation
Hide thumbs
Also See for SIMATIC HMI Series:
- System manual (226 pages) ,
- Operating instructions manual (130 pages) ,
- Getting started (52 pages)
Table of Contents
Configuring the Mobile Panel
6.1 Configuration in WinCC
3. Select an HMI device of the type KTP Mobile or KTP F Mobile for an F-system and select
the "Start Device Wizard" checkbox.
4. Select "Finish".
The Mobile Panel is added to the project.
6.1.3
Configuring a fail-safe Mobile Panel
The emergency stop or stop can be evaluated either by a hardwired F-system or by a
PROFIsafe-based F-system.
● For a hardwired F-system:
The fail-safe Mobile Panel must be configured like a non-fail-safe Mobile Panel. The
"PROFIsafe" option must not be activated.
● PROFIsafe-based F-system:
The "PROFIsafe" option must be enabled for the fail-safe Mobile Panel.
The following procedure is for configuring a fail-safe Mobile Panel.
170
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
- Quick Links:
- Product Overview
Hide quick links:
Table of Contents
