Commissioning
May 2019
5.2
Commissioning introduction
The wireless devices can be commissioned once they are configured and installed
properly. The following steps are included in the commissioning procedure:
Procedure
1. Start up the devices
2. Verify that all devices are connected to the network
3. Verify network device status
4. Verify network design rules
5. Optional: View network live using the AMS Wireless SNAP-ON software (see also
5.2.1
Log on to the Emerson Wireless Gateway's integrated
web server
During the commissioning use the Emerson Wireless Gateway's integrated web server. To
log on to the Emerson Wireless Gateway's integrated web server, do the following:
Procedure
1. Open a standard web browser (typically Microsoft
2. Enter the current IP address of the Emerson Wireless Gateway's integrated web
3. Acknowledge the security to proceed.
4. Enter admin for User Name and default for the Password.
52
View network
live)
server in the address bar.
The initial view of the gateway's web server is illustrated in
Reference Manual
00809-0100-5200
®
Internet Explorer).
Figure
5-1.
Reference Manual