1. Manuals
  2. Brands
  3. Allen-Bradley Manuals
  4. Controller
  5. PowerFlex 755 IP00
  6. Installation instructions manual

Allen-Bradley PowerFlex 755 IP00 Installation Instructions Manual

Nema/ul open type drive frames 8...10
Hide thumbs
Table of Contents

Quick Links

Installation Instructions
Original Instructions
PowerFlex 755 IP00, NEMA/UL Open Type Drive Frames 8...10
Catalog Numbers 200...1500 kW (250...2000 Hp)
Installation Tools
Enclosure Requirements
CE Conformity
Horizontal Mounting Guidelines - Single Drive Unit Only
Dimensions
Lifting
Drive Installation
Selecting/Verifying Control Transformer Voltage
Installing the Control Pod in the Drive
Power Wiring
Kit Installation Guidelines
Cable Routing
I/O Wiring
Fuse and Circuit Breaker Ratings
Additional Resources
This document provides instructions for the installation of an IP00, Open Type PowerFlex® 755 drive (Frames 8...10) in
a user supplied enclosure.
The information provided in this publication supplements the PowerFlex 750-Series AC Drives Installation Instructions,
publication 750-IN001, and is intended for qualified drive service personnel only.
Page
2
2
3
4
6
8
12
16
16
23
26
28
36
38
41
42
45
49
58
59
67
76
Table of Contents
loading

Related Manuals for Allen-Bradley PowerFlex 755 IP00

Summary of Contents for Allen-Bradley PowerFlex 755 IP00

  • Page 1: Table Of Contents

    Installation Instructions Original Instructions PowerFlex 755 IP00, NEMA/UL Open Type Drive Frames 8…10 Catalog Numbers 200…1500 kW (250…2000 Hp) Topic Page Summary of Changes General Precautions Certifications Overview Installation Overview AC Input Drives Common DC Input Drives Installation Tools Enclosure Requirements CE Conformity Horizontal Mounting Guidelines –...

  • Page 2: Topic Page

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Summary of Changes This publication contains new and updated information as indicated in the following table. Topic Page Removed the footnote from Table G. Corrected catalog numbers in the AC Input Drive Installation Kits table, corrected footnote 8, and added footnote 9.

  • Page 3: Certifications

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Personal Safety (continued) ATTENTION: Hazard of personal injury or equipment damage due to unexpected machine operation exists if the drive is configured to automatically issue a Start or Run command. Do not use these functions without considering applicable local, national and international codes, standards, regulations or industry guidelines.

  • Page 4: Overview

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Overview Selecting and Integrating an IP00 System The following steps will guide you in planning and installing a PowerFlex 755 IP00, NEMA/UL Open Type drive. 1. Considerations Drive size (Hp & V AC), required accessories/options (HIM, comms, etc.)
  • Page 5 PowerFlex 755 IP00, NEMA/UL Open Type Drive Catalog Number Explanation Position 1…3 8…10 f1…f2 Drive ND Rating ND Rating Code Type 400V AC / 540V DC, 50 Hz Input 600V AC / 810V DC, 60 Hz Input PowerFlex 755 Quantity...

  • Page 6: Installation Overview

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Installation Overview AC Input Drives A typical IP00 installation for an AC input drive is shown below. See pages 8…10 for available kits and ratings. Outlet Ducting Kit Mounting Kit Control Pod For drive mounting, see...
  • Page 7 PowerFlex 755 IP00, NEMA/UL Open Type Drive Common DC Input Drives A typical IP00 installation for a common DC input drive is shown below. See pages 12…14 for available kits and ratings. Outlet Ducting Kit Mounting Kit Control Pod For drive mounting, see...

  • Page 8: Ac Input Drives

    PowerFlex 755 IP00, NEMA/UL Open Type Drive AC Input Drives Drive Ratings The following tables provide rating and selection information for the PowerFlex 755 IP00 NEMA/UL Open Type AC input drives. 380…480V AC, Three-Phase, 50 Hz Input Three-Phase, 0…400 Hz Output...
  • Page 9 PowerFlex 755 IP00, NEMA/UL Open Type Drive 600V AC, Three-Phase, 60 Hz Input Three-Phase, 0…400 Hz Output Light Duty Normal Duty Heavy Duty Input Voltage Output Amps Output Amps Output Amps Range Input Input Input Base Drive Quantity Equivalent Amps Cont.
  • Page 10 PowerFlex 755 IP00, NEMA/UL Open Type Drive AC Input Drive Installation Kits The following kits are available to assist you with installation of drive components in your enclosure. Note that certain kits are required for proper installation and for UL certification.
  • Page 11 PowerFlex 755 IP00, NEMA/UL Open Type Drive Frame 8 Frame 9 Frame 10 Rockwell Automation Publication 750-IN020D-EN-P - May 2017...

  • Page 12: Common Dc Input Drives

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Common DC Input Drives Drive Ratings The following tables provide rating and selection information for the common DC input PowerFlex 755 IP00 NEMA/UL Open Type drives. 540V DC, 50 Hz Input Three-Phase, 0…400 Hz Output Light Duty...
  • Page 13 PowerFlex 755 IP00, NEMA/UL Open Type Drive 810V DC, 60 Hz Input Three-Phase, 0…400 Hz Output Light Duty Normal Duty Heavy Duty Input Voltage Output Amps Output Amps Output Amps Range Input Input Input Base Drive Quantity Equivalent Amps Cont.
  • Page 14 PowerFlex 755 IP00, NEMA/UL Open Type Drive Common DC Input Drive Installation Kits The following kits are available to assist you with installation of drive components in your enclosure. Note that certain kits are required for proper installation and for UL certification.
  • Page 15 PowerFlex 755 IP00, NEMA/UL Open Type Drive Not Shown Frame 8 Frame 9 Frame 10 Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 16 PowerFlex 755 IP00, NEMA/UL Open Type Drive Installation Tools Care must be taken to ensure that tools and/or hardware components do not fall into IMPORTANT open drive assemblies. Do not energize the drive unless all loose tools and/or hardware components have been removed from the drive assemblies and enclosure.
  • Page 17 PowerFlex 755 IP00, NEMA/UL Open Type Drive In addition, the bus bar must be supported as detailed in the figure below. Power Terminal T45 - M10 x 35 mm SEMS 22.4 N•m (200 lb•in) Bus Bar Drive Support within 305 mm (12.0 in.) Environmental Requirements The drive shall be mounted in an enclosure with 40 °C (104 °F) ambient external...
  • Page 18 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 1 - Dual Airflow System Ventilation Requirements Free Area Description 780 cm (120.9 in. Enclosure Cooling Enclosure Fans See Important statement below Drive Power Cooling 811.6 cm (125.8 in. (1) Enclosure fans are required and must meet or exceed the...
  • Page 19 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 3 - Outlet Ducting Kit (20-750-DUCT2-F8) Details Outlet Ducting kit attaches to top mounting bracket and should be installed before the drive unit is rolled-in. User supplied ducting is mounted to enclosure top and matches up with the ducting kit.
  • Page 20 PowerFlex 755 IP00, NEMA/UL Open Type Drive Enclosure Fans Enclosure fans are required and must meet or exceed the performance shown in Figure 5 for two fans operating at 10.76 CMM (380 CFM) each with 1.27 mm (0.05 in.) H O static pressure.
  • Page 21 PowerFlex 755 IP00, NEMA/UL Open Type Drive ATTENTION: To avoid an electric shock hazard when servicing the drive, a means for Lockout/Tagout of an external 120/240V power source must be provided. Locking and tagging the common bus precharge disconnect switch alone does not provide sufficient protection when servicing the drive.
  • Page 22 PowerFlex 755 IP00, NEMA/UL Open Type Drive Drive Grounding A PE termination point is supplied with the Inverter (AC Output) and Converter (AC Input) termination kits shown on page 6 page 7. Mounting/ drilling recommendations are provided on page 39...
  • Page 23 PowerFlex 755 IP00, NEMA/UL Open Type Drive CE Conformity Additional palm safe shield(s) are required for operator safety and CE IMPORTANT conformance. Compliance with the Low Voltage Directive and Electromagnetic Compatibility Directive has been demonstrated using harmonized European Norm (EN) standards published in the Official Journal of the European Communities.
  • Page 24 PowerFlex 755 IP00, NEMA/UL Open Type Drive • PowerFlex 750-Series drives generate harmonic current emissions on the AC supply system. When operated on a public low-voltage network it is the responsibility of the installer or user to ensure that applicable requirements of the distribution network operator have been met.
  • Page 25 PowerFlex 755 IP00, NEMA/UL Open Type Drive • All control (I/O) and signal wiring to the drive must use cable with a braided shield providing 75% or greater coverage, or the cables must be housed in metal conduit, or equivalent shielding must be provided. When shielded cable is used, only the drive end of the cable shield should be terminated with a low-impedance connection to earth.
  • Page 26 PowerFlex 755 IP00, NEMA/UL Open Type Drive Horizontal Mounting To guard against sub-panel flexing, support pieces should be added to the underside of the panel along each long edge. Guidelines – Single Drive Unit Only Figure 8 - Open Style Drive - Horizontal Installation...
  • Page 27 PowerFlex 755 IP00, NEMA/UL Open Type Drive Derating Guidelines for Horizontal Mounting - Three-Phase Input/Output, Frame 8 Only Light Duty Normal Duty Heavy Duty 50/60 Hz Input Output 50/60 Hz Input Output 50/60 Hz Input Output Catalog Code Volts Amps Volts...
  • Page 28 PowerFlex 755 IP00, NEMA/UL Open Type Drive Dimensions Figure 10 - Drive Unit Dimensions - AC Input Height with 15.9 (0.63) dia. for Lifting, 2 Places Outlet Ducting Kit Outlet Height without 2063.7 (81.25) Ducting Kit Outlet Ducting Kit 2012.4 (79.23) 1983.8 (78.10)
  • Page 29 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 11 - Drive Unit Dimensions – Common DC Input Height with Outlet Ducting 15.9 (0.63) dia. Outlet Ducting Kit for Lifting, 2 Places Height without 2063.7 (81.25) Outlet Ducting Kit 2012.4 (79.23) 1983.8 (78.10)
  • Page 30 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 12 - Overall Dimensions with Mounting and Termination Kits – Frame 8 AC Input 5.0 mm (0.2 in.) - 4 places Shown without 777.9 11.3 N•m (100 lb•in) Outlet Ducting Kit (30.63) Outlet Ducting Kit 1978.8 (77.91)
  • Page 31 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 13 - Overall Dimensions with Mounting and Termination Kits – Frame 8 Common DC Input 5.0 mm (0.2 in.) - 4 places 11.3 N•m (100 lb•in) Shown without 777.9 Outlet Ducting Kit (30.63)
  • Page 32 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 14 - Overall Dimensions with Mounting and Termination Kits – Frame 9 AC Input Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 33 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 15 - Overall Dimensions with Mounting and Termination Kits – Frame 9 Common DC Input Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 34 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 16 - Overall Dimensions with Mounting and Termination Kits – Frame 10 AC Input Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 35 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 17 - Overall Dimensions with Mounting and Termination Kits–Frame 10 Common DC Input Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 36 PowerFlex 755 IP00, NEMA/UL Open Type Drive Lifting Consult the enclosure manufacturers documentation for proper enclosure IMPORTANT lifting procedures. ATTENTION: To guard against possible personal injury and/or equipment damage: • Inspect all lifting hardware for proper attachment before lifting drive or enclosure.
  • Page 37 PowerFlex 755 IP00, NEMA/UL Open Type Drive Moving the Drive Assembly to a Vertical Position When approaching the full upright (vertical) position, be aware of the wheels IMPORTANT at the bottom of the drive assembly. Blocking the wheels may be necessary to guard against undesired movement.
  • Page 38 PowerFlex 755 IP00, NEMA/UL Open Type Drive Horizontal Lifting Recommended Lifting Bar (User Supplied) Recommended Material: AISI C1018 or ASTM A36 Hardness: 66 HRB minimum 734.0 (28.90) 12.7 (0.50) Dia. Minimum Working Load: 318 kg (700 lb) 659.2 (25.95) 6 places 47.6 (1.88)
  • Page 39 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 18 - Frame 8 Drilling Dimensions Drill all holes (qty. 34) to 9.00 (0.354) diameter Fasten kits to the control panel with M8 or 5/16 in. screws. 160.00 (6.299) Ref 1935.28 (76.192) 1821.28 (71.704)
  • Page 40 PowerFlex 755 IP00, NEMA/UL Open Type Drive Figure 19 - Frame 9 and 10 Drilling Dimensions Drill all holes (qty. 34) to 9.00 (0.354) diameter Fasten kits to the control panel with M8 or 5/16 in. screws. 160.00 (6.299) Ref 1935.28 (76.192)
  • Page 41 PowerFlex 755 IP00, NEMA/UL Open Type Drive Selecting/Verifying Control The control transformer is located inside the upper right part of the drive assembly and is typically set to match the input line voltage. The control Transformer Voltage transformer provides the single-phase 240V internal control voltage, power for the drive blower, and the enclosure fans.
  • Page 42 PowerFlex 755 IP00, NEMA/UL Open Type Drive Installing the Control Pod in The following steps will guide you through installation of the Control Pod in the drive. To mount the pod in a remote location up to 23 m (75 ft) from the drive, the Drive order the Remote Mount kit (catalog number 20-750-RPD1-F8).
  • Page 43 PowerFlex 755 IP00, NEMA/UL Open Type Drive 4. Swing the Control Pod into the converter assembly and tighten the captive screws on the back panel. T20 or F - 6.4 mm (0.25 in.) 1.8 N•m (16 lb•in) 5. Insert the two position connector of the single-bay 24V wire harness into terminal P14 on the Fiber Interface Board.
  • Page 44 PowerFlex 755 IP00, NEMA/UL Open Type Drive Fiber Interface Board Connections Name Description Internal 24V Power Connection Connects between P14 and TB1 Optional 24V Connection User supplied External 24V Power Source (see below) Inverter Fiber-optic Connection Fiber-optic cable between P1 (fiber-optic transceiver INV1) and Power Layer Interface Board 7.
  • Page 45 PowerFlex 755 IP00, NEMA/UL Open Type Drive External Power Supply Connections Power Block Terminal Name Description +24 Volt Auxiliary Power Connections for user supplied power supply: 24V DC ±10%, 5 A, PELV (Protective Extra Low Voltage) or SELV AP– Auxiliary Power Common...
  • Page 46 PowerFlex 755 IP00, NEMA/UL Open Type Drive Wire Recommendations Type Description Min. Insulation Rating (1)(2) Power Standard • Four tinned copper conductors with XLPE insulation. 600V, • Copper braid/aluminum foil combination shield and 75 °C (167 °F) tinned copper drain wire.
  • Page 47 PowerFlex 755 IP00, NEMA/UL Open Type Drive Power Terminals ATTENTION: To guard against drive damage, Do Not connect power wires directly to the drive power terminals. Power wiring must be connected to bus bars which are fastened to the drive power terminals. See...
  • Page 48 PowerFlex 755 IP00, NEMA/UL Open Type Drive Termination Kit Current Rating Current Rating at Specified Drive Input Voltage 380…400V AC 480V AC 600V AC 690V AC Termination Kit Frame Catalog Number 513…540V DC 650V DC 810V DC 932V DC Converter (AC Input)

  • Page 49: Converter (Ac Input)

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Kit Installation Guidelines Steps Converter AC Input Field Side Detail Termination 20-750-BUS2-F8 Ground Bond Strap (see page for hardware and torque requirements) 73.50 (2.894) x 12 37.9 N•m (336 lb•in) T40 - M8 9.0 N•m (80 lb•in)

  • Page 50: 20-750-Bus4-F8

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Steps Inverter DC Bus Field Termination 20-750-BUS4-F8 Side Detail 37.9 N•m (336 lb•in) T40 - M8 9.0 N•m (80 lb•in) 73.50 (2.894) Ground Bond Location (see page for hardware and torque requirements) Movable L-bracket...
  • Page 51 PowerFlex 755 IP00, NEMA/UL Open Type Drive Steps DC Input for Common Bus Precharge Field Termination (continued) Ground Bond Location (see page for hardware and torque requirements) 37.9 N•m (336 lb•in) Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 52 PowerFlex 755 IP00, NEMA/UL Open Type Drive Steps Mounting Floor/Rail … 20-750-MNT3-F8 Note: Discard unused spacers Rittal Style Enclosure The Floor/Rail Kit is supplied with two sets of spacers that are used to adapt the kit to different enclosure types. See the diagram below.

  • Page 53: 20-750-Bus2-F9

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Steps Converter AC Input Field Termination 20-750-BUS2-F9 73.50 (2.894) 37.9 N•m (336 lb•in) T40 - M8 9.0 N•m (80 lb•in) Rockwell Automation Publication 750-IN020D-EN-P - May 2017...

  • Page 54: 20-750-Bus3-F9

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Steps Inverter AC Output Field Termination 20-750-BUS3-F9 73.50 (2.894) 37.9 N•m (336 lb•in) T40 - M8 9.0 N•m (80 lb•in) Inverter DC Bus Field Termination 20-750-BUS4-F9 (400/480V) 20-750-BUS6-F9 (600/690V) 73.50 (2.894) Physical size of fuses are...

  • Page 55: 20-750-Bus5-F9

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Steps DC Input for Common Bus Precharge Field Termination 37.9 N•m (336 lb•in) 20-750-BUS5-F9 T40 - M8 9.0 N•m (80 lb•in) 73.50 (2.894) Ground Bond Location (see page for hardware and torque requirements)

  • Page 56: 20-750-Bus2-F10

    PowerFlex 755 IP00, NEMA/UL Open Type Drive Steps Converter AC Input Field Termination 37.9 N•m (336 lb•in) 20-750-BUS2-F10 T40 - M8 9.0 N•m (80 lb•in) 73.50 (2.894) Inverter AC Output Field Termination 37.9 N•m (336 lb•in) 20-750-BUS3-F10 T40 - M8 9.0 N•m (80 lb•in)
  • Page 57 PowerFlex 755 IP00, NEMA/UL Open Type Drive Steps Inverter DC Bus Field Termination 37.9 N•m (336 lb•in) 20-750-BUS4-F10 (400/480V) T40 - M8 9.0 N•m (80 lb•in) 20-750-BUS6-F10 (600/690V) 73.50 (2.894) Ground Bond Location (see page for hardware and torque requirements)
  • Page 58 PowerFlex 755 IP00, NEMA/UL Open Type Drive Cable Routing Control Pod Cable Routing Supports, clips, and cable ties are provided to help route and secure cabling inside the Control Pod. • When routing cabling into the control Pod, do not block the cooling fan IMPORTANT outlet.
  • Page 59 PowerFlex 755 IP00, NEMA/UL Open Type Drive I/O Wiring Important points to remember about I/O wiring: • Always use copper wire. • Wire with an insulation rating of 600V or greater is recommended. • Control and signal wires should be separated from power wires by at least 0.3 meters (1 foot).
  • Page 60 PowerFlex 755 IP00, NEMA/UL Open Type Drive I/O Terminal Blocks The various I/O terminal blocks are located in the Control Pod. Main Control Board Main Control Board Details No. Name Description HIM Connector DPI Port 1 (HIM Cradle) connection. Fan Connector Power supply for internal cooling fan.
  • Page 61 PowerFlex 755 IP00, NEMA/UL Open Type Drive Terminal Block Specifications Wire Size Range Torque Strip Name Maximum Minimum Maximum Recommended Length Main Control Board - TB1 2.5 mm 0.3 mm 0.25 N•m 0.2 N•m 6 mm (14 AWG) (28 AWG) (2.2 lb•in)
  • Page 62 PowerFlex 755 IP00, NEMA/UL Open Type Drive Fiber Interface Board Details Name Description Main Control Board Connector 98 pin main control board interface connection. Connections for user-supplied 24 volt power. Powers control circuits when main power is removed. Connections for internal drive-supplied 24 volt power. Connection is factory wired and must not be modified by the user.
  • Page 63 PowerFlex 755 IP00, NEMA/UL Open Type Drive ATTENTION: Hazard of equipment damage exists if an option module is installed or removed while the drive is powered. To avoid damaging the drive, verify that the voltage on the bus capacitors has discharged completely and all control power is removed before performing any work on the drive.
  • Page 64 PowerFlex 755 IP00, NEMA/UL Open Type Drive I/O Module ATTENTION: Risk of equipment damage exists. Ensure that the correct voltage 20-750-2262C-2R (24 Volts DC) is applied to the I/O Module digital inputs. See the I/O Module catalog number 20-750-2263C-1R2T (24 Volts DC) to determine the voltage rating.
  • Page 65 PowerFlex 755 IP00, NEMA/UL Open Type Drive TB1 Terminal Designations Related Terminal Name Description Param Shield Terminating point for wire shields when an EMC plate or conduit box is not installed. Ptc– Motor PTC (–) Motor protection device (Positive Temperature Coefficient).
  • Page 66 PowerFlex 755 IP00, NEMA/UL Open Type Drive TB2 Terminal Designations (1 Relay and 2 Transistor Outputs: IR2T) Related Relay Out Terminal Name Description Param R0NO Relay 0 N.O. Relay Normally Open contact output: 10, 100, 101, 105, 240V AC, 24V DC, 2 A max.
  • Page 67 PowerFlex 755 IP00, NEMA/UL Open Type Drive Fuse and Circuit Breaker The tables on pages 68…74 provide drive ratings (including continuous, 1 minute and 3 second) and recommended AC line input fuse and circuit breaker Ratings information. Sizes listed are the recommended sizes based on 40 °C (104 °F) and the U.S.
  • Page 68 PowerFlex 755 IP00, NEMA/UL Open Type Drive Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 69 PowerFlex 755 IP00, NEMA/UL Open Type Drive Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 70 PowerFlex 755 IP00, NEMA/UL Open Type Drive Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 71 PowerFlex 755 IP00, NEMA/UL Open Type Drive Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 72 PowerFlex 755 IP00, NEMA/UL Open Type Drive Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 73 PowerFlex 755 IP00, NEMA/UL Open Type Drive Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 74 PowerFlex 755 IP00, NEMA/UL Open Type Drive Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 75 PowerFlex 755 IP00, NEMA/UL Open Type Drive Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 76 Provides declarations of conformity, certificates, and other certification details. http://www.rockwellautomation.com/global/certification/overview.page You can view or download publications at http://www.rockwellautomation.com/global/literature-library/overview.page. To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative. Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 77 PowerFlex 755 IP00, NEMA/UL Open Type Drive Notes: Rockwell Automation Publication 750-IN020D-EN-P - May 2017...
  • Page 78 How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf. Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page. Allen-Bradley, DPI, PowerFlex, Rockwell Automation, Rockwell Software, and SCANport are trademarks of Rockwell Automation, Inc. EtherNet/IP is a trademark of ODVA, Inc.

Table of Contents