Table of Contents
Controller Tags
When the Ethernet interface is added to the project, the tags that are shown in
Figure 54
appear in the Controller Tags section of the Studio 5000 project.
The Ethernet interface has both Input and Output tags. Notice the three relays
match the example from
See publication
440R-UM009
tags. The DG safety relay tags are described in detail in
Figure 54 - Ethernet Interface Tags
Select Lock Command
Figure 55
shows how to select the Lock Command for an individual tap.
1. Expand the Ethernet module output.
2. Expand the relay output.
3. Expand the GuardLink output.
4. Expand the LockCmd selections.
5. Click the desired tap.
Figure 55 - Select Lock Command
1
2
Rockwell Automation Publication 440R-UM015C-EN-P - April 2018
440R-ENETR Network Interface Add-on Profile
Figure
53.
for more information on Ethernet interface
3
5
Chapter 9
Table 13 on page
70.
4
69
Table of Contents
