Replacing The Cabinet Fans (R5 And R6); Replacing The Fans At Upper Part Of The Cubicle; Replacing The Additional Fan At The Lower Part Of The Cubicle (R6 With Du/Dt Filter, +E205) - ABB ACS800-U7 Hardware Manual
Acs800
45 to 560 kw; 50 to 600 hp
Hide thumbs
Also See for ACS800-U7:
- Firmware manual (214 pages) ,
- Hardware manual (96 pages) ,
- Manual (42 pages)
Table of Contents
98
Replacing the cabinet fans (R5 and R6)
Replacing the fans at upper part of the cubicle
1. Remove the fan cassette from the cabinet as shown in section
drive module (R5 and R6)
2. Undo the fastening screws of the fans.
3. Install the new fans in reverse order to the above.
Replacing the additional fan at the lower part of the cubicle (R6 with du/dt filter, +E205)
1. Remove the screws that mount the support frame of the fan to the cabinet frame.
2. Pull the fan support frame outwards and disconnect the fan supply wires
(detachable connector).
3. Remove the fan frame from the cabinet.
4. Remove the screws that mount the fan to the fan frame.
5. Install a new fan in reverse order.
Maintenance
on page 106.
2
2
2
2
2
2
2
2
Replacing the
Fan cassette
(view from below)
Table of Contents
