Routing The Cables (Frame Sizes R7 And R8) - ABB ACS800-U7 Hardware Manual
Acs800
45 to 560 kw; 50 to 600 hp
Hide thumbs
Also See for ACS800-U7:
- Firmware manual (214 pages) ,
- Hardware manual (96 pages) ,
- Manual (42 pages)
Table of Contents
68
Routing the cables (frame sizes R7 and R8)
Run the cables to the inside of the cabinet through the grommets (1) and the EMI
conductive cushions (2) to the swing-out frame as shown below.
Use sleeving wherever the cables are laid against sharp edges. Leave some slack in
the cable at the hinge (3) to allow the frame to open fully. Tie the cables to the
braces (4) to provide strain relief.
Electrical installation
4
4
4
2
1
Table of Contents
