Replacing The Capacitor Pack (R8) - ABB ACS800-U7 Hardware Manual
Acs800
45 to 560 kw; 50 to 600 hp
Hide thumbs
Also See for ACS800-U7:
- Firmware manual (214 pages) ,
- Hardware manual (96 pages) ,
- Manual (42 pages)
Table of Contents
Replacing the capacitor pack (R8)
1. Remove the module from the cabinet as described in section
module (R7 and R8)
2. Remove the front cover. Remove the profiled side plate.
3. Disconnect the discharging resistor wires.
4. Undo the red fastening screws.
5. Lift the capacitor pack out.
6. Install the new capacitor pack in reverse order to the above.
2 pcs
4
M6x12 combi screw
on page
108.
5
4
4
4
M6
M10
At the rear side (view
4
from below)
4
4
3
105
Replacing the drive
3
3
2 pcs in
690 V
units
Maintenance
Table of Contents
