Cooling; Degrees Of Protection; Ambient Conditions - ABB ACS800-U7 Hardware Manual

Acs800 45 to 560 kw; 50 to 600 hp
Hide thumbs Also See for ACS800-U7:
Table of Contents
130

Cooling

Method
Filter material
Free space around the unit
Cooling air flow

Degrees of protection

Ambient conditions

Installation site altitude
Air temperature
Relative humidity
Contamination levels
(IEC 60721-3-3,
IEC 60721-3-2,
IEC 60721-3-1)
Atmospheric pressure
Vibration (IEC 60068-2)
Shock (IEC 60068-2-27)
Free fall
Technical data
Internal fan, flow direction from front to top
IP22 / IP42 units
IP54 units
See
Free space around the
See
IEC data.
IP21 (UL type 1), IP22 (UL type 1), IP42 (UL type 2),
IP54 (UL type 12 for indoor use only), IP54R
Environmental limits for the drive are given below. The drive is to be used in a heated,
indoor, controlled environment.
Operation
installed for stationary use
0 to 4000 m (13123 ft) above
sea level [above 1000 m
(3281 ft), see section
Derating].
Cabinets with option +Q968:
0 to 2000 m (6562 ft)
-15 to +50 °C (5 to 122 °F).
No frost allowed. See
section Derating.
5 to 95%
No condensation allowed. Maximum allowed relative humidity is 60% in the presence of
corrosive gases.
No conductive dust allowed.
Boards without coating:
Chemical gases: Class 3C1
Solid particles: Class 3S2
Boards with coating:
Chemical gases: Class 3C2
Solid particles: Class 3S2
70 to 106 kPa
0.7 to 1.05 atmospheres
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
2
2
max. 7 m/s
(23 ft/s
)
(13.2 to 100 Hz) sinusoidal
Not allowed
Not allowed
Inlet (door)
airTex G150
288 mm x 292 mm
688 mm x 521 mm
Luftfilter/airComp 300-50
288 mm x 292 mm
688 mm x 521 mm
unit.
Storage
in the protective package
-
-40 to +70 °C
(-40 to +158 °F)
Max. 95%
Boards without coating:
Chemical gases: Class 1C2
Solid particles: Class 1S3
Boards with coating:
Chemical gases: Class 1C2
Solid particles: Class 1S3
70 to 106 kPa
0.7 to 1.05 atmospheres
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
2
2
max. 7 m/s
(23 ft/s
)
(13.2 to 100 Hz) sinusoidal
2
Max. 100 m/s
(330 ft./s
11 ms
100 mm (4 in.) for weight
over 100 kg (220 lb)
Outlet (roof)
-
Luftfilter/airTex G150
2 pcs: 398 mm x 312 mm
Transportation
in the protective package
-
-40 to +70 °C
(-40 to +158 °F)
Max. 95%
Boards without coating:
Chemical gases: Class 2C2
Solid particles: Class 2S2
Boards with coating:
Chemical gases: Class 2C2
Solid particles: Class 2S2
60 to 106 kPa
0.6 to 1.05 atmospheres
Max. 3.5 mm (0.14 in.)
(2 to 9 Hz),
2
max. 15 m/s
(49 ft/s
(9 to 200 Hz) sinusoidal
2
2
),
Max. 100 m/s
(330 ft./s
11 ms
100 mm (4 in.) for weight
over 100 kg (220 lb)
2
)
2
),
Table of Contents
loading

This manual is also suitable for:

Acs800-07

Table of Contents