WARNING: Before conducting repair, be sure to turn off the power switch and disconnect the
power cord plug from the power source outlet.
1. Precautions on disassembly and reassembly
[Bold] and numbers in the description below correspond to the item numbers in the parts lists and
exploded assembly diagrams of the Models CG 25SC and CG 30SC, respectively.
Disassembly of the Model CG 25SC
CAUTION: Be careful not to cut your finger with the Blade [51] located on the back of the
Protecting Cover [50].
1. Disassembling the housing section
(1) Open the Guide [43] wide and detach it from the housing
as shown in Fig. 1.
(2) Pull up the Upper Cover [49] from the Wire Roll Support [41] while pushing in its two latches together.
Remove the Wire Roll [47] with the nylon wire and Spring (D) [46]. Next, remove the Screws ST4 x 12
[10]. Turn the Protecting Cover [50] in the arrow direction as shown in Fig. 2 to remove it.
Fig. 2
[49]
1
[41]
[50]
REPAIR GUIDE
2
Latch (2 pcs.)
1
[51]
[10]
-1-
Fig. 1
[43]
[50]
[46]
[47]
[48]
[49]
[10]