NEC UNIVERGE SV8300 System Maintenance Manual page 53
Ip pbx
Hide thumbs
Also See for UNIVERGE SV8300:
- Command manual (804 pages) ,
- Pc programming manual (232 pages) ,
- Manual (54 pages)
Table of Contents
(4)
Conditions for RTP monitoring
• If the SIP trunk does not receive RTP for 10 seconds after establishing the path, the fault
information (fault kind 043) is registered and the path is released.
• The fault information (fault kind 043) is registered whenever the path is released by RTP monitor-
ing.
• The RTP monitoring starts when one packet is received from the originating office after a path is
established. Even during ringing, RTP monitoring functions when sending/receiving RTP.
• When the path is released by RTP monitoring, the SIP call disconnect message is sent to the
originating office.
Chapter 1 MAINTENANCE SERVICES
1-41
VoIP LOG COLLECTION
NWA-033627-001 Rev.4.0
95ch1001.fm
APRIL/16/2010
Chapters
Table of Contents
Troubleshooting
