Table of Contents
Replacing the left AlienFX side-
panel connector
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Route the cable through the slot on the bracket and align the screw holes on
the left AlienFX side-panel connector with the screw holes on the bracket.
2
Replace the two screws (#6-32x6) that secure the AlienFX side-panel
connector to the bracket.
3
Align the screw hole on the left AlienFX side-panel connector with the screw
hole on the chassis.
4
Replace the screw (#6-32x6) that secures the left AlienFX side-panel
connector to the chassis.
5
Connect the cable that connects the left AlienFX side-panel connector to the
system board. See
Post-requisites
1
Replace the left and right side-panels. See
2
Replace the
58
"I/O-board
stability
foot.
computer. After working inside your
After working inside your
components".
"Replacing the side
panels".
Hide quick links:
Table of Contents
