Huawei NetEngine80E Configuration Manual - Reliability page 624
Hide thumbs
Also See for NetEngine80E:
- Configuration manual - reliability (1432 pages) ,
- Configuration manual (1301 pages) ,
- Installation manual (169 pages)
Table of Contents
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
[PE1-md-md1-ma-ma1] remote-mep mep-id 2
[PE1-md-md1-ma-ma1] mep ccm-send mep-id 1 enable
[PE1-md-md1-ma-ma1] remote-mep ccm-receive mep-id 2 enable
[PE1-md-md1-ma-ma1] quit
[PE1-md-md1] quit
# Configure PE2.
[HUAWEI] sysname PE2
[PE2] cfm enable
[PE2] cfm version standard
[PE2] cfm md md1
[PE2-md-md1] ma ma1
[PE2-md-md1-ma-ma1] map mpls l2vc 2 tagged
[PE2-md-md1-ma-ma1] mep mep-id 2 interface gigabitethernet1/0/1.1 inward
[PE2-md-md1-ma-ma1] remote-mep mep-id 1
[PE2-md-md1-ma-ma1] mep ccm-send mep-id 2 enable
[PE2-md-md1-ma-ma1] remote-mep ccm-receive mep-id 1 enable
[PE2-md-md1-ma-ma1] quit
[PE2-md-md1] quit
Step 3 Configure LMM reception on PE2.
# Configure PE2.
[PE2-md-md1-ma-ma1] loss-measure single-ended receive
Step 4 Enable proactive single-ended frame loss measurement on a VLL.
# Configure PE1.
[PE1-md-md1-ma-ma1]
0001-0001-0001 interval 30000
[PE1-md-md1-ma-ma1] quit
[PE1-md-md1] quit
Step 5 Verify the configuration.
Run the
one-ended frame loss measurement.
----End
Configuration Files
l
Issue 02 (2011-09-10)
loss-measure single-ended continual mep mep-id 1 mac
display y1731 statistic-type
Configuration file of PE1
#
sysname PE1
#
cfm version standard
cfm enable
#
mpls lsr-id 1.1.1.1
mpls
#
mpls l2vpn
#
mpls ldp
#
interface GigabitEthernet1/0/1.1
vlan-type dot1q 2
mpls l2vc 2.2.2.2 2
#
interface GigabitEthernet1/0/2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
command on PE1, and you can view information about
9 Y.1731 Configuration
607
Table of Contents
