Optional) Binding The Pw To The Mvrrp Backup Group Through Vpls; Checking The Configuration - Huawei NetEngine80E Configuration Manual - Reliability
Hide thumbs
Also See for NetEngine80E:
- Configuration manual - reliability (1432 pages) ,
- Configuration manual (1301 pages) ,
- Installation manual (169 pages)
Table of Contents
HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
The member interface is bound to the mVRRP backup group.
----End
4.11.5 (Optional) Binding the PW to the mVRRP Backup Group
Through VPLS
By configuring the binding of a PW and an mVRRP backup group, you can associate the PW
with the mVRRP backup group.
Context
Do as follows on the routers that need to bind the PW to the mVRRP backup group.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vsi
The VSI view is displayed.
Step 3 Run:
pwsignal
The VSI-LDP view is displayed.
Step 4 Run:
peer
type interface-number vrid virtual-router-id
The PW is bound to the VRRP backup group.
Before the PW is bound to the mVRRP backup group, the peer must exist.
For the configuration of the PW, refer to Chapter "VPLS Configuration" in the HUAWEI
NetEngine80E/40E Router Configuration Guide - VPN.
----End
4.11.6 Checking the Configuration
By viewing all bindings in an mVRRP backup group, you can check whether the configurations
are successful.
Prerequisite
The configurations of the mVRRP backup groups function are complete.
Issue 02 (2011-09-10)
vsi-name static
ldp
peer-address [ negotiation-vc-id vc-id ] track admin-vrrp interface interface-
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VRRP Configuration
131
Table of Contents
