Emerson Unidrive M200 Control Quick Start Manual page 38

00.043 {11.025}

RW

Txt

300 (0), 600 (1), 1200 (2),

OL

2400 (3), 4800 (4), 9600 (5),

RFC-A

Defines the serial baud rate of the drive

Changing the parameters does not immediately change the serial communications settings. See

Reset Serial Communications (00.045) for more details.

00.044 {11.023}

RW

Num

OL

RFC-A

Used to define the unique address for the drive for the serial interface. The drive is always a slave

address 0 is used to globally address all slaves, and so this address should not be set in this

parameter.

Changing the parameters does not immediately change the serial communications settings. See

Reset Serial Communications (00.045) for more details.

00.045 {11.020}

RW

Bit

OL

RFC-A

Set to On (1) to update communications set-up.

The display will briefly display On and return to Off on reset.

NOTE

00.046 {12.042}

RW

Num

OL

RFC-A

Defines the upper current threshold for the brake. See Brake Controller Brake Release in Drive User

Guide.

38

Serial Baud Rate

19200 (6), 38400 (7),

57600 (8), 76800 (9),

115200 (10)

Serial Address

1 to 247

Reset Serial Communications

Off (0) or On (1)

Brake Controller Upper Current Threshold

0 to 200 %

19200 (6)

ND

NC

Off (0)

50 %

Unidrive M200/201 Control Quick Start Guide

US

US

1

US

US

Issue Number: 2