Recommended Tools - Allen-Bradley PowerFlex 700 Installation Instructions Manual

Description

Enclosure Options

Converter Gasket Kit

Inverter Gasket Kit

(1) This kits was issued to correct a potential anomaly for frame 10 PowerFlex 700 AC drives. See Product Safety Advisory #2014-06-002

for more information.

(2) AC input applies to PowerFlex 700 catalog numbers beginning with 20BC875 or 20BD875.

(3) DC input applies to PowerFlex 700 catalog numbers beginning with 20BH875 or 20BJ875.

(4) Transformer and transformer fuses apply to AC input PowerFlex 700 catalog numbers beginning with 20BC875A or 20BD875A (IP20,

NEMA/UL Type 1 only).

(5) Fuses included with order are two 6 A fuses and one 9 A fuse.

See the master parts list for the most up-to-date information:

http://www.ab.com/support/abdrives/powerflex70/PF7ReleasedParts.pdf

See the instruction sheet included with each component kit for discarding

IMPORTANT

or returning replaced components.

If discarding, be sure to discard according to local, state, and federal

regulations.

The following list of tools is provided for your reference to disassemble and

reassemble the drive and components. This list may not include all tools for your

situation. Not all tools are needed for some components. See specific sections for

details.

Description

Torque wrench (metered in N•m or lb•in)

Volt ohm meter

Torque seal or colored marker

Screwdrivers (standard, Phillips, torx

Magnetic screwdriver, long

Socket set, metric

Cylindrical pick-up magnet

Pliers, regular and needle-nose

Wire cutters

Isopropyl alcohol and applicator cloth

Nylon tie wraps

3- or 4-inch paint roller with short nap or 3- or 4-inch putty knife (for applying thermal grease)

Pencil

Rockwell Automation Publication 20B-IN026C-EN-P - October 2015

Kit Catalog No.

Notes

SK-G1-GASKET2-F10

For AC input only

SK-G1-GASKET1-F10

For DC input only

–

various sizes)

Preface

(2)

(3)

11