Install Components - Allen-Bradley PowerFlex 700 Installation Instructions Manual

Adjustable frequency ac drive

Hide thumbs Also See for PowerFlex 700:

Table of Contents

Chapter 2

Basic Component Removal Procedures

8. Remove the six nuts for mounting the Stacking Panel.

Mounting Nuts (6)

9. Remove Stacking Panel and carefully set aside.

Install Components

1. Reinstall the Stacking Panel components in the reverse order of removal.

2. Torque mounting nuts to 5.6 N•m (50 lb•in).

3. Replace all wiring to TB9.

4. Replace the black Thermal Sensor Wire to J6 on the Power Interface

Board.

5. Replace the red and black wires from TB2 on the DC Bus Filter Board.

6. Replace all safety shields and enclosure covers before applying power to the

drive.

Rockwell Automation Publication 20B-IN026C-EN-P - October 2015

Table of Contents