Dot1X Authentication-Method - Huawei Quidway S6500 Series Command Manual
Ethernet switches release 3000 series
Hide thumbs
Also See for Quidway S6500 Series:
- Supplementary manual (5 pages) ,
- Operation manual (647 pages)
Table of Contents
Command Manual - Security
Quidway S6500 Series Ethernet Switches
Parameter
interface interface-list: Ethernet port list including several Ethernet ports. interface-list
= { interface-num [ to interface-num ] } & < 1-10 >. interface-num specifies a single
Ethernet port in the format interface-num = { interface-type interface-num |
interface-name }, where interface-type specifies the port type, interface-num specifies
the port number and interface-name specifies the port name. For the respective
meanings and value ranges, read the Parameter of the Port Configuration section.
Description
Using dot1x command, you can enable 802.1x on the specified port or globally (i.e., on
the current device). Using undo dot1x command, you can disable the 802.1x on the
specified port or globally.
By default, 802.1x is disabled on all the ports and globally on the device.
This command is used to enable the 802.1x on the current device or on the specified
port. When it is used in system view, if the parameter ports-list is not specified, 802.1x
will be globally enabled. If the parameter ports-list is specified, 802.1x will be enabled
on the specified port. When this command is used in Ethernet port view, the parameter
interface-list cannot be input and 802.1x can only be enabled on the current port.
The configuration command can be used to configure the global or port 802.1x
performance parameters before or after 802.1x is enabled. Before 802.1x is enabled
globally, if the parameters are not configured globally or for a specified port, they will
maintain the default values.
After the global 802.1x performance is enabled, only when port 802.1x performance is
enabled will the configuration of 802.1x become effective on the port.
For the related commands, see display dot1x.
Example
# Enable 802.1x on Ethernet 3/0/1.
[Quidway] dot1x interface Ethernet 3/0/1
# Enable the 802.1x globally.
[Quidway] dot1x
1.1.3 dot1x authentication-method
Syntax
dot1x authentication-method { chap | pap | eap }
undo dot1x authentication-method
View
System view
Huawei Technologies Proprietary
1-3
Chapter 1 802.1x Configuration Commands
Chapters
Table of Contents
