Display Ospf Abr-Asbr - Huawei Quidway S6500 Series Command Manual
Ethernet switches release 3000 series
Hide thumbs
Also See for Quidway S6500 Series:
- Supplementary manual (5 pages) ,
- Operation manual (647 pages)
Table of Contents
Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
OSPF process 200 debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
3.1.14 display ospf abr-asbr
Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Parameter
process-id: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
Description
Using display ospf abr-asbr command, you can view the information about the ABR
and ASBR of OSPF.
Example
# Display the information of the OSPF area border routers and autonomous system
border routers.
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination
IA 2.2.2.2
Table 3-1 Description of information generated by the command display ospf abr-asbr
Destination
Area
Cost
Nexthop
Interface
OSPF Process 1 with Router ID 10.110.98.138
Area
0.0.0.0
Field
Router ID of the ABR or ASBR
Area where the router is connected with ASBR
The routing overhead value of the route
Nexthop address to the destination
The local output interface
Huawei Technologies Proprietary
Chapter 3 OSPF Configuration Commands
Cost
Nexthop
10
10.153.17.89
Description
3-11
Interface
Vlan-interface1
Chapters
Table of Contents
