Display Ospf Error - Huawei Quidway S6500 Series Command Manual
Ethernet switches release 3000 series
Hide thumbs
Also See for Quidway S6500 Series:
- Supplementary manual (5 pages) ,
- Operation manual (647 pages)
Table of Contents
Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
3.1.18 display ospf error
Syntax
display ospf [ process-id ] error
View
Any view
Parameter
process-id: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
Description
Using display ospf error command, you can view the OSPF error information.
Example
# Display the OSPF error information.
OSPF packet error statistics:
0: IP: received my own packet
0: OSPF: wrong version
0: OSPF: wrong area id
0: OSPF: wrong virtual link
0: OSPF: wrong authentication key
0: OSPF: packet size > ip length
0: OSPF: interface down
0: HELLO: netmask mismatch
0: HELLO: dead timer mismatch
0: HELLO: router id confusion
0: HELLO: NBMA neighbor unknown
0: DD: router id confusion
0: DD: unknown LSA type
0: LS ACK: wrong ack
0: LS ACK: unknown LSA type
0: LS REQ: empty request
0: LS UPD: neighbor state low
0: LS UPD: LSA checksum wrong
0: LS UPD: unknown LSA type
0: DD: MTU option mismatch
OSPF Process 1 with Router ID 1.1.1.1
Huawei Technologies Proprietary
3-17
Chapter 3 OSPF Configuration Commands
0: OSPF: wrong packet type
0: OSPF: wrong checksum
0: OSPF: area mismatch
0: OSPF: wrong authentication type
0: OSPF: too small packet
0: OSPF: transmit error
0: OSPF: unknown neighbor
0: HELLO: hello timer mismatch
0: HELLO: extern option mismatch
0: HELLO: virtual neighbor unknown
0: DD: neighbor state low
0: DD: extern option mismatch
0: LS ACK: neighbor state low
0: LS ACK: duplicate ack
0: LS REQ: neighbor state low
0: LS REQ: wrong request
0: LS UPD: newer self-generate LSA
0: LS UPD: received less recent LSA
0: OSPF routing: next hop not exist
0: ROUTETYPE: wrong type value
Chapters
Table of Contents
