Huawei Quidway S6500 Series Command Manual page 227
Ethernet switches release 3000 series
Hide thumbs
Also See for Quidway S6500 Series:
- Supplementary manual (5 pages) ,
- Operation manual (647 pages)
Table of Contents
Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Area 0.0.0.0:
Authtype: none
SPF scheduled: <>
Interface: 201.1.1.4 (Vlan-interface1)
Cost: 1 State: DR
Priority: 1
Designated Router: 201.1.1.4
Backup Designated Router: 201.1.1.3
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
Table 3-3 Description of information generated by the command display ospf brief
RouterID
Border Router
spf-schedule-interval
Authtype
Routing preference
Default
parameters
SPF
count
Area Count
Nssa Area Count
SPF scheduled
Interface
Cost
State
Type
Priority
Designated Router
Backup
Router
Flags: <>
Type: Broadcast
Field
Router ID of the router
Border routers for connection to the area, including
autonomous system border router (ASBR) and area
border router (ABR)
Interval of SPF schedule
Authentication type of OSPF
Routing preference of OSPF. The internal route of OSPF
includes intra/inter area route, and its default routing
preference is 10. While that of the external route of OSPF
is 150 by default
ASE
Default ASE parameters of OSPF, including metric, type
and tag
computation
SPF computation count since OSPF is enabled
Areas for connection to this router
Number of NSSA areas
SPF scheduled (flag)
Interface name belonging to this area
Cost of routes
State information
Network type of OSPF interface
Priority
IP address of designated router (DR)
Designated
IP address of backup designated router (BDR)
Huawei Technologies Proprietary
Chapter 3 OSPF Configuration Commands
Description
3-14
Chapters
Table of Contents
