Loopback-Detection Enable; Loopback-Detection Interval-Time - Huawei Quidway S6500 Series Command Manual
Ethernet switches release 3000 series
Hide thumbs
Also See for Quidway S6500 Series:
- Supplementary manual (5 pages) ,
- Operation manual (647 pages)
Table of Contents
Command Manual - Port
Quidway S6500 Series Ethernet Switches
1.1.11 loopback-detection enable
Syntax
loopback-detection enable
undo loopback-detection enable
View
System view/Ethernet port view
Parameter
none
Description
Using loopback-detection enable command, you can enable the port loopback
detection. If there is a loopback port found, the switch will put it under control. Using
undo loopback-detection enable command, you can disable the port loopback
detection.
The loopback detection of the specified port functions only after port loopback detection
is enabled in system view and Ethernet port view.
By default, port loopback detection is disabled.
For the related command, see display loopback-detection.
Example
# Enable the port loopback detection.
System View: return to User View with Ctrl+Z.
[Quidway] loopback-detection enable
[Quidway] interface ethernet 1/0/1
[Quidway-Ethernet1/0/1] loopback-detection enable
[Quidway-Ethernet1/0/1]
1.1.12 loopback-detection interval-time
Syntax
loopback-detection interval-time time
undo loopback-detection interval-time
View
System view
Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-11
Chapters
Table of Contents
