Table of Contents
Replacement Routines
Figure 20: Removing the intrusion detection switch
Ê Remove the intrusion detection switch from the holder (1).
Ê Release the cable from the cable clamp (circle) and remove the switch with
cable.
V
CAUTION!
Make a note of the cable routing.
Ê Place the new switch into the holder, route the cable through the cable
clamp, and connect it to the INTR connector on the system board (see
D1859 sticker).
Ê Close the server (for a detailed description see the Options Guide) and
reconnect the power plug.
Econel 50
Replacing the Intrusion Detection Switch
Service Supplement
1
29
Chapters
Table of Contents
