Fujitsu PRIMERGY RX300 S8 Instructions Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Server
  5. PRIMERGY RX300 S8
  6. Instructions manual

Fujitsu PRIMERGY RX300 S8 Instructions Manual

System configurator and order information guide
Show thumbs Also See for PRIMERGY RX300 S8:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

Table of Contents

See also: Upgrade and Maintenance Manual
PRIMERGY RX300 S8
System configurator and order-information guide
March 2017
Contents
Instructions
Configuration diagram
Configurator
0
System software
I
Basic unit
II
IV Graphics
V
VII PCI Controller
VIII Raid Controller and Devices for SAS3.0 (12 Gb/sec)
X
PRIMERGY Server
Table of Contents
loading

Related Manuals for Fujitsu PRIMERGY RX300 S8

Summary of Contents for Fujitsu PRIMERGY RX300 S8

  • Page 1: Table Of Contents

    PRIMERGY RX300 S8 System configurator and order-information guide March 2017 Contents Instructions Configuration diagram Configurator System software Basic unit Processor III Memory IV Graphics Accessible drives VI Hard disk drives VII PCI Controller VIII Raid Controller and Devices for SAS3.0 (12 Gb/sec)
  • Page 2 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/System-Architect. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.

  • Page 3: Processor

    System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Configuration diagram PRIMERGY RX300 S8 System unit ( I ) with up to 6x 3.5" Hard disk drives Motherboard front side Memory CPU1 ( Channel A + B + C )
  • Page 4 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Configuration diagram PRIMERGY RX300 S8 System unit ( I ) with up to 4, 8, 12 or 16x 2.5" Hard disk drives or up to 4 or 8 PCIe SSDs 2.5"...
  • Page 5 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Start PRIMERGY RX300 S8 Section Basic unit System unit consisting of: * 2U Housing without power supply modules * Basic units with: - 2 Hot-Plug Power Supply Bays - 5 Fans (full redundancy) - 12 memory DIMMs per CPU ( max 768GB ) =>...
  • Page 6 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Cables included in basic unit Connections Cable PRIMERGY RX300 S7  SAS    SATA SATA DVD 2. SAS cables to HDDs     1x cable for SAS signaling...
  • Page 7 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 PRIMECENTER Rack S26361-F2735-E175 S26361-F2735-E111 Further information for Rack Mount Kit F1-C S7 LV No Rackmount-Kit option rack mounting is available for PCR M1 and 3rd party racks Only for loose deliveries...
  • Page 8 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Section Processor There are 2 processor sockets available. The first socket must always be equipped with the first CPU which can be selected via configurator It is also possible to upgrade a dual-processor system later on with a second CPU...
  • Page 9 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Section Graphics Graphics Controller integrated in iRMC S3 (integrated Remote Management Controller): 1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz, 640x480x32bpp 85Hz (1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
  • Page 10 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Section Memory - There are 12 memory slots per CPU for max. 768GB LRDIMM (12x 64GB 8R) 192GB RDIMM (12x 16GB 2R) 64GB UDIMM (8x 8GB) on special Release only =>...
  • Page 11 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 S26361-F3694-E10 Independent Mode Independent Channel Mode allows all channels to be populated in any order. No specific Memory RAS features are defined Requires min 1 memory Module per CPU S26361-F3694-E1 Rank Sparing Mode Installation BIOS Setup factory preinstalled to this mode.
  • Page 12 PRIMERGY RX300 S8 Status 2017-02-28 Memory Configuration PRIMERGY RX300 S8 Each CPU offers 12 Slots for DDR3 Memory Modules organised in 3 Banks and 4 Channels. If you need more than 12 Slots you have to configure the 2nd CPU.
  • Page 13 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 1. Independent Channel Mode required required if 2nd CPU is configured Channel C hannel Channel Channel Channel C hannel Channel C hannel Bank I Data Data Data Data Data Data...
  • Page 14 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 4. Rank Sparing Mode 1-Rank Memory modules (RDIMM) required required if 2nd CPU is configured Channel C hannel Channel Channel Channel Channel C hannel C hannel Bank I optional, same type in Channel per CPU...
  • Page 15 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Section Possible configuration options for basic units Config 1: 6x or 4x 3.5” HDD + 3.5" DDS/RDX drive Is fixed due to selection of basic unit with: S26361-K1457-V101 6x 3,5" HDD bays fixed SAS3.0 available since Q2/2014...
  • Page 16 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Section Accessible drives Setup RX300 S7 by ServerStart is supported with following configurations: no DVD, no CD: remote installation only ( PXE service & DHCP server required) built in CD/DVD or USB CD/DVD disk drive:...
  • Page 17 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 SAS Controller for internal Backup Drives S26361-F3674-E1 For external SAS Backup drives Onboard 4 port SAS Controller an additional SAS controller has to be configured Only for basic unit Patsburg B V4xx RAID 0, 1 &...
  • Page 18 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Section Hard disks drives Modular Raid controller is connected to internal HDDs For basic units V1xx up to 6 SAS 3.5" hard disks can be configured also in mixed configuration.
  • Page 19 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Solid State Disk 2.5", Mainstream Endurance* SSD SATA 6Gb/s 2.5" with hot plug/hot replace tray 100GB MLC, Mainstream Performance S26361-F5225-E100 as long as stock 200GB MLC, Mainstream Performance S26361-F5225-E200 as long as stock...
  • Page 20 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 S26361-F3837-L64 SATA DOM 64GB, 3G, Maintream Endurance, non-hot plug Special Release PCIe SSD (occupies one PCIe slot) S26361-F4522-E351 S26361-F4522-E781 S26361-F4522-E121 PCIe-SSD 365GB MLC PCIe-SSD 785GB MLC PCIe-SSD 1.2TB MLC ioDrive2 365GB ioDrive2 785GB ioDrive2 1.2TB...
  • Page 21 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Section Modular Raid 0/1, Raid5 for SAS or SATA HD`s. On-board Controller for max. 4x 2.5" SATA or SAS HD`s On board SATA Controller with 3 Gb/sec and up to 4x 2.5" SATA HDDs (no additional controller required) For up to 4x 2.5"...
  • Page 22 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 SAS-/SCSI-/ Fibre-Channel Controller Low Profile SAS controller for external backup drives or JBOD subsystems (as soon as available) S26361-F3628-E201 SAS Controller 6Gb/s 8 port LP LSI SAS9200-8e LP PCIe 2.0 x4, ext: 8 port max.
  • Page 23 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 SAS RAID controller for JBOD subsystems S26361-F3713-E203 RAID Ctrl SAS 6G 8port external LSI MegaRAID SAS 9286CV-8e 1GB Cache with ECC RAID 0, 1, 5, 6, 10, 50 & 60...
  • Page 24 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 VIII Section Raid Controller and Devices for SAS3.0 (12 Gb/sec) Modular Raid 5 controller for SAS 12GB/s The FBU is an option for the controller RAID levels 0, 1, 10, 5, 50, 6 and 60 which can be used once per controller.
  • Page 25 System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Section Communication / Network 2x Gigabit (Dualport) Ethernet Contr. Modular On-Board LAN is a flexible extension of a cost-optimized Motherboard onboard with basic 2x Gbit LAN on-board. Intel LAN I350 (Powerville)
  • Page 26 2x per controller max. 2x per controller separate orderable 10Gb Ethernet cables S26361-F3989-L102 SFP+ active Twinax Cable Fujitsu 2m The controller D2755 is delivered without SFP+ modules for optical S26361-F3989-L105 SFP+ active Twinax Cable Fujitsu 5m cables, these must be ordered separately.
  • Page 27 Cisco branded cable max. 2x per controller max. 2x per controller max. 2x per controller separate orderable 10Gb Ethernet cables S26361-F3989-L102 SFP+ active Twinax Cable Fujitsu 2m S26361-F3989-L105 SFP+ active Twinax Cable Fujitsu 5m S26361-F3989-L110 SFP+ active Twinax Cable Fujitsu 10m S26361-F3873-L501...

  • Page 28: System Management Products (Remoteview)

    System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Section System Management Products (RemoteView) iRMC S4 (integrated Remote Management Controller) onboard server management Controller with dedicated 10/100/1000 Service LAN-port and integrated graphics. S26361-F1790-E243 iRMC S4 advanced pack integrated remote management controller...

  • Page 29: Country Specific Power Cord

    System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 XIII Section Country specific power cord S26361-F1452-E100 S26361-F1452-E110 S26361-F1452-E130 S26361-F1452-E140 REGION KIT APAC/EMEA/India REGION KIT JP REGION KIT America REGION KIT Europe For Shipments to Asia pacific, For Shipments to Japan regions...
  • Page 30 Modulare SV DC -48V 800W gold hp S26113-F609-E10 Cable powercord rack, 4m, grey T26139-Y1968-E100 Ltg Netzanschluss -48V DC, 4m, schwarz T26139-Y4024-E10 Leitung Netzanschluss (USA), 1,8m, grau T26139-Y1742-E10 TPM Modul S26361-F3552-E1 End PRIMERGY RX300 S8 Fujitsu PRIMERGY Server 30 of 31...

  • Page 31: Change Report

    System configurator and order-information guide PRIMERGY RX300 S8 Status 2017-02-28 Change Report Date Order number Changes comment added 2017-02-09 S26361-F5243-E4/L4 corrected from 50kg to 15kg 2016-09-27 S26361-F2735-L10 added 2016-06-02 S26361-F5243-E4/L4 added 2016-05-10 S26361-F3669-E671/L671 added 2016-05-10 S26361-F3669-E670/L670 removed 2016-05-10 S26361-F3669-E661/L661 removed...

Table of Contents