Table of Contents
Replacing the Floppy Disk Drive
Figure 7: Removing the EasyClick rails
Ê Remove the EasyClick rails from the slide-in unit.
1
Figure 8: Removing the floppy disk drive
Ê Remove two screws on both sides (1) and push the floppy disk drive in the
direction of the arrow (2) and remove it from the slide-in unit. Take care that
the USB connector cable is not damaged when removing the drive.
Ê Insert the new floppy disk drive into the slide-in unit and fasten it with two
screws on each side.
Ê Reattach the EasyClick rails to the slide-in unit.
Ê Insert the slide-in unit into the housing.
Ê Reconnect the cables.
Ê Close the server (for a detailed description see the Options Guide) and
reconnect the power plug.
20
Service Supplement
Replacement Routines
2
Econel 50
Chapters
Table of Contents
