Table of Contents
Replacement Routines
Ê Remove the left side cover as described in section "Removing/Mounting the
Side Cover" on page 13.
Ê Disconnect all power supply cables from the system board and from the
drives (see cabling in the appendix).
Figure 2: Fold out the power supply unit
Ê Loosen the screw (1) and swing the power supply unit out from the
housing (2).
Ê Slide the cross-beam at the left side in the direction of the arrow (2) and
swing it to the right (3).
Proceed in the reverse order to shut the PSU in place.
Econel 50
1
2
Service Supplement
General Purposes
15
Chapters
Table of Contents
