Table of Contents
Main memory
Ê Align the notch on the bottom of the module with the crossbar in the
connector (see close-up).
Figure 362: Installing memory modules (C)
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
10.2.3 Concluding steps
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê If available, update the system board BIOS to the latest version as described
in section
"Updating or recovering the system board BIOS and iRMC" on
page
134.
"Enabling SVOM boot watchdog functionality" on page 146
Ê
Ê If applicable, configure the memory mode as described in section
the memory mode" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:
478
147.
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
"Verifying
TX300 S8 / RX350 S8
- Quick Links:
- Hard Disk Drives / Solid State...
Hide quick links:
Table of Contents
