Table of Contents
Hard disk drives / solid state drives
Figure 211: Installing the SAS expander board (B)
Ê Slide the expander board to the right as far as it will go (1).
The shoulder screw caps on the expander board spacer bolts will lock in the
narrow ends of the keyhole slots on the spacer board (see close-up).
Ê Secure the SAS expander board in the chassis with the captive knurled
thumb screw on the board (2).
Ê Change SAS cabling according to the new server configuration as described
in sections
"2.5-inch HDD / SSD configurations" on page 185
HDD configurations" on page
7.5.1.4
Concluding steps
"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:
314
241.
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
and
"3.5-inch
TX300 S8 / RX350 S8
- Quick Links:
- Hard Disk Drives / Solid State...
Hide quick links:
Table of Contents
