Figure 324: Securing the SAS RAID controller
Ê Secure the RAID controller with the captive screw on the RAID card holder.
9.5.2.4
Connecting cables to the expansion card
Ê Connect SAS cables to the SAS RAID controller.
I
For a complete cabling overview, please refer to section
overviews" on page
9.5.2.5
Connecting a backup unit to the expansion card
Ê If applicable, connect a BBU or FBU to the expansion card as described in
sections
"Installing a BBU" on page 435
9.5.2.6
Concluding steps
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê Reconnect all external cables to the replaced expansion card.
"Connecting the server to the mains" on page 118
Ê
TX300 S8 / RX350 S8
738.
Upgrade and Maintenance Manual
Expansion cards and backup units
or
"Installing an FBU" on page
"Cabling
440.
429