Connecting Cables To The Expansion Card; Connecting A Backup Unit To The Expansion Card - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual
Hide thumbs
Also See for PRIMERGY TX300 S7:
- Upgrade and maintenance manual (962 pages) ,
- Operating manual (90 pages) ,
- System configurator and order-information manual (36 pages)
Table of Contents
Expansion cards and backup units
Figure 258: Securing the expansion card
Ê Insert (1) and close the locking bar (2) until the latch locks in place (see
close-up).
Ê If applicable, install SFP+ transceiver modules into the new expansion card,
as described in section
9.2.1.6
Connecting cables to the expansion card
Ê If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
overviews" on page
9.2.1.7
Connecting a backup unit to the expansion card
Ê If applicable, connect a BBU or FBU to the expansion card as described in
sections
"Installing a BBU" on page 488
408
"Installing SFP+ transceiver modules" on page
851.
Upgrade and Maintenance Manual
or
"Installing an FBU" on page
TX300 S7 / RX350 S7
521.
"Cabling
496.
Table of Contents
