Removal Of Horizontal Blades / Vertical Blades - Daikin FTXS20G2V1B Service Manual
G-series
Hide thumbs
Also See for FTXS20G2V1B:
- Operation manual (38 pages) ,
- Technical data manual (18 pages) ,
- Installation manual (16 pages)
Table of Contents
SiENBE04-808_A
1.4
Removal of Horizontal Blades / Vertical Blades
Procedure
Step
1. Remove the horizontal
blade (large).
1
Open the horizontal
blade (large).
2
Unfasten the center
shaft while bending the
horizontal blade (large)
slightly.
3
Unfasten the left shaft.
4
Unfasten the key
alignment shaft at the
right side.
Removal Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Horizontal blade (large)
Horizontal blade (small)
Caution on Mounting
Mount the large horizontal
blade to the upper side and
the small horizontal blade to
the lower side.
Do not put them in the
wrong place.
(R7921)
(R7922)
(R7923)
Caution on Mounting
There is a key alignment at
the right shaft. When
mounting, insert the right
shaft first while turning.
After inserting the right
shaft, mount the horizontal
blade first to the center shaft
and then to the left shaft.
(R7924)
Indoor Unit
Points
162
- Quick Links:
- Cooling Only
- Heat Pump
- Specifications
- Specifications
Hide quick links:
Table of Contents
Troubleshooting
