Panasonic DP-3510 Service Manual page 738
Digital imaging system
Hide thumbs
Also See for DP-3510:
- Operating instructions manual (168 pages) ,
- Information sheet (12 pages) ,
- Service handbook (12 pages)
Table of Contents
11.3.2.2.3. Job Offset
1. Outline
"Job offset" refers to the operation by which the machine delivers a set of sheets with them pulled
forward or backward for sorting.
Switching between the forward and backward directions is accomplished by using an aligning plate
(Front) and an aligning plate (Rear).
The sheet coming between the Delivery Rollers is fed onto the Processing Tray and then fed toward
the stopper by the Paddle.
A swing guide is at the upper position while a sheet is being pulled onto the Processing Tray or during
alignment. It is at the lower position during stack feeding, stack delivery, or stapling.
At power-on, the Finisher Controller PCB drives the Aligning Plate (Front) Motor (M4) and the Aligning
Plate (Rear) Motor (M5) to return the two aligning plates to their home positions.
Sensor
Aligning Plate (Front)
Home Position Sensor
Aligning Plate (Rear)
Home Position Sensor
Swing Guide Home
Position Sensor
Paddle Home Position
Sensor
Ver. 5.2
Symbol
Connector
PI4
CN4-3
PI5
CN5-15
PI3
CN9-9
PI2
CN9-3
Alignment Plate (Front)
Motor (M4)
Aligning Plate
(Front)
Light-Shielding Plate
(Front)
Aligning Plate (Front) Home Position Sensor (PI4)
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Function
Drives the Aligning Plate
(Front)
Drives the Aligning Plate
(Rear)
Drives the Swing Guide
Drive
Drives the Paddle (feeds
paper)
Table 2-003
Aligning plate (Rear)
Aligning plate (Rear)
home position sensor (PI5)
Aligning plate (Rear)
motor (M5)
Paper
Fig. 2-017
738
Motor
Aligning Plate
(Front) Motor
Aligning Plate
(Rear) Motor
Paddle Motor
Paddle Motor
Light-shielding plate
Symbol
M4
M5
M2
M2
JAN 2006
Hide quick links:
Table of Contents
Troubleshooting
