Staple Operation - Panasonic DP-3510 Service Manual
Digital imaging system
Hide thumbs
Also See for DP-3510:
- Operating instructions manual (168 pages) ,
- Information sheet (12 pages) ,
- Service handbook (12 pages)
Table of Contents
11.1.2.2.5. Staple Operation
1. Outline
The Stapler Unit staples a stack of as many sheets as specified.
The stapling position differs according to the selected staple mode and paper size. The Stapler Unit is
checked by the Stapler Shift Home Position Sensor (PI7) to find out whether it is at the home position.
When starting operation after power-on, the Finisher Controller PCB drives the Stapler Shift Motor (M4)
to return the Stapler Unit to the home position. If the Stapler is already at the home position, then (M4)
is not turned on.
Stapler Shift Home
Position Sensor (PI7)
Ver. 5.2
Sheets
Front diagonal stapling
Rear diagonal stapling
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Stapler Shift Motor (M4)
Stapler
Fig. 2-031
2-point stapling
Rear 1-point stapling
Fig. 2-032
522
Paper
width/2
JAN 2006
Hide quick links:
Table of Contents
Troubleshooting
