Panasonic DP-3510 Service Manual page 655
Digital imaging system
Hide thumbs
Also See for DP-3510:
- Operating instructions manual (168 pages) ,
- Information sheet (12 pages) ,
- Service handbook (12 pages)
Table of Contents
7. E7-24 (Faulty Stapler Shift Motor)
Cause
Stapler Shift Home
Position Sensor (PI7)
Wiring
Stapler Shift Base
Stapler Shift Motor
(M4)
Finisher Controller
PCB
8. E7-48 (Faulty Swing Motor)
Cause
Swinging Mechanism Turn the Swing Motor in reverse by
Swing Guide Closed
Detection Switch 2
(MS6)
Swing Motor (M7)
Finisher Controller
PCB
Swing Guide Open
Sensor (PI18)
Safety Range Switch
(MS3)
Swing Guide Clock
Sensor (PI20)
Finisher Controller
PCB
Ver. 5.2
Checks
Check the stapler shift home position
sensor. Is the sensor normal?
Is the wiring between the Finisher
Controller PCB and the stapler shift
motor normal?
Is there any mechanical obstacle in the
path of the stapler shift base?
Replace the stapler motor. Is the
problem corrected?
Checks
hand. Does the swing guide move up
and down?
Is the swing guide closed detection
switch 2 normal?
Is the swing guide closed detection
switch 2 pressed correctly?
Does the swing motor rotate in reverse
at a specific timing?
Is the swing guide open sensor normal? No Replace the sensor.
Check the safety range switch. Is the
switch normal?
Is the safety range detection switch
pressed correctly?
Check the swing guide clock sensor. Is
the sensor normal?
Does the voltage of the swing motor
between J11-6 and -7 on the Finisher
Controller PCB reach 24 V at a specific
rotation timing?
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
Yes
/ No
No Replace the sensor.
No Correct the wiring.
Yes Remove the mechanical
Yes End.
No Replace the Finisher
Yes
/ No
No Correct the swing
No Replace the microswitch.
No Correct mechanical
Yes Replace the Finisher
No Replace the motor.
Yes Replace the Finisher
No Replace the switch.
No Correct mechanical
No Replace the sensor.
No Replace the Finisher
Yes Check the wiring from the
655
Action
obstacles.
Controller PCB.
Action
mechanism.
operation.
Controller PCB.
Controller PCB.
operation.
Controller PCB.
motor to the Finisher
Controller PCB. If normal,
replace the motor.
JAN 2006
Hide quick links:
Table of Contents
Troubleshooting
