Events Tab; Defaults - Emerson Avocent User Manual

Matrix high performance kvm switching system
Hide thumbs Also See for Avocent:
Table of Contents
5.  Click  Save  to push the changes to all attached receivers. 

Events tab

The Events tab is where event logging is configured. Events can be manually downloaded to a file 
or automatically sent to a syslog server for longer term storage.
Individual events can be enabled or disabled by manipulating the Disabled Events and Enabled 
Events lists. Simply click on one or more events and click the buttons to move them from one list to 
the other.
The table below lists the options and descriptions for the Events tab.
Events Tab Settings
Option
Description
Syslog Server IP 
The IP address of a syslog server that event log messages should be sent to 
Address
when they are generated.
Log Error Events
Controls whether Errors are recorded to the event log.
Log Warning 
Controls whether warnings are recorded to the event log.
Events
Log Informational 
Controls whether informational messages are recorded to the event log.
Events
NOTE: Logged events are stored in volatile memory on the switch. If power is lost or the switch is reset then 
the list of events is cleared. 

Defaults

The Defaults tab is where the OSD and receiver session time-outs are set as well as the transmitter 
USB Mode and traffic priorities are configured. These defaults apply when a new receiver or 
transmitter is added to the system.
Default Tab Options Descriptions
Setting
OSD Inactivity Timeout
Receiver Session Timeout
Transmitter USB Mode
Description
The time-out, in minutes, 
after which the OSD display 
disappears. 
The time-out, in minutes, 
after which the user is 
logged out and his KVM 
session terminated if there 
is no keyboard/mouse 
activity at the receiver.
The default set for the 
transmitter USB when a 
new transmitter is added. 
By default, this is set to all 
On-Board Web Interface
.....
33

Hide quick links:

Table of Contents
loading

Table of Contents