Emerson AVOCENT MATRIX Quick Installation Manual

Avocent

MAtrix high perforMAnce KvM

®

switching systeM

Quick Installation Guide

HELPFUL RESOURCES

downloads are available at:

www.avocent.com/manuals

– or –

Search for additional product

information at:

www.avocent.com

For further assistance contact

Avocent Technical Support.

Assembling the rack mount rails

1

Each rack mount rail consists of two

brackets. For the right rail, slide the

two A brackets together. For the left

rail, slide the two B brackets together.

When installing the rail assemblies into

the rack cabinet, make sure the rail

flanges point away from the center of

the rack.

NOTE: The brackets are not interchange-

able. Be sure to use the A rack rail

assembly on the right side of the rack

cabinet and the B assembly on the left

side of the rack cabinet.

Installing the rack mount rails to

2

the rack

Using the guide pins on the rails, attach

the two rack mount rail assemblies to

the front and back of the the rack and

tighten the captive screws.

To Contact Avocent Technical Support: Visit www.avocent.com

Emerson, Emerson Network Power and the Emerson Network Power logo are trademarks or service trademarks of Emerson Electric Co. Avocent, the Avocent logo are trademarks or service trademarks of Avocent

Corporation. This document may contain confidential and/or proprietary information of Avocent Corporation, and its receipt or possession does not convey any right to reproduce, disclose its contents, or to manufacture or sell

anything that it may describe. Reproduction, disclosure, or use without specific authorization from Avocent Corporation is strictly prohibited. ©2013 Avocent Corporation. All rights reserved.

Rack mounting the switch

Guide

Pin

No Hole

in Front Rail

2

Front of Rack

3

Installing the switch in the rack

3

From the rear of the rack, slide the

switch into the rails. Ensure the switch

brackets are securely inserted into the

rails and tighten the screws to secure

the switch.

Rail Flange

BACK

of Rack Cabinet

1

Rack Rail

Assembly

'B'

(VIEW FRoM

(LHS)

ABoVE)

FRONT

of Rack Cabinet

Flange

Rail Flange

Captive

Screw

Square Hole

in Rear Rail

Flange

Rear of Rack

Verifying switch placement in

4

the rack

Be sure that the back of the Matrix

switch is mounted in the rear of the rack.

Rack Rail

Assembly

'A'

(RHS)

4

590-1143-501B

1