Rtc Battery - HP Elite x2 1011 G1 Maintenance And Service Manual
Hide thumbs
Also See for Elite x2 1011 G1:
- User manual (103 pages) ,
- Maintenance and service manual (155 pages) ,
- Quickspecs (39 pages)
Table of Contents
RTC battery
Description
RTC battery (includes cable and double-sided adhesive)
Before removing the RTC battery, follow these steps:
1.
Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and
then shut it down through the operating system.
2.
Disconnect all external devices connected to the slate.
3.
Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4.
Remove the display panel assembly (see
the following components:
a.
Battery (see
b.
WLAN module (see
c.
WWAN module (see
d.
Fan (see
e.
System board (see
Remove the RTC battery:
1.
Turn the system board upside down with the docking connector toward you.
2.
Disconnect the RTC battery cable (1) from the system board.
3.
Remove RTC battery (2).
56
Chapter 5 Removal and replacement procedures – slate
Battery on page
36)
WLAN module on page
WWAN module on page
Fan on page
43)
System board on page
Display panel assembly on page
37)
39)
49)
Spare part number
793723-001
32), and then remove
- Quick Links:
- Miscellaneous Parts
- Battery
- Rtc Battery
Hide quick links:
Table of Contents
