Wwan Module - HP Elite x2 1011 G1 Maintenance And Service Manual
Hide thumbs
Also See for Elite x2 1011 G1:
- User manual (103 pages) ,
- Maintenance and service manual (155 pages) ,
- Quickspecs (39 pages)
Table of Contents
WWAN module
Description
HP hs3110 HSPA+ Mobile Broadband
HP lt4112 LTE/HSPA+ 4G Mobile Broadband
HP lt4225 LTE/EV-DO Gobi 4G Module
HP lt4226 LTE/HSPA+ Gobi 4G Module
CAUTION:
To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the slate by the governmental agency that regulates wireless devices in your country or
region. If you replace the module and then receive a warning message, remove the module to restore device
functionality, and then contact technical support.
Before removing the WWAN module, follow these steps:
1.
Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and
then shut it down through the operating system.
2.
Disconnect all external devices connected to the slate.
3.
Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4.
Remove the display panel assembly (see
5.
Disconnect the battery cable from the system board (see
Remove the WWAN module:
1.
Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
NOTE:
The WWAN antenna cable labeled "6/Aux" connects to the WWAN module "6/Aux" terminal.
2.
Remove the Phillips PM1.9×3.4 screw (2) that secures the WWAN module to the bottom cover. (The
WWAN module tilts up.)
The WWAN antenna cable labeled "5/Main" connects to the WWAN module "5/Main" terminal.
Display panel assembly on page
Battery on page
Spare part number
748599-005
740011-005
736676-005
736675-005
32).
36).
WWAN module
39
- Quick Links:
- Miscellaneous Parts
- Battery
- Rtc Battery
Hide quick links:
Table of Contents
